Count
Count
Chkd
Description of revisions
Chkd Date
Description of revisions
Date
By
By
△
△
△
△
Applicable standard
Operating
temperature range
Storage
temperature range
-10℃ ~ +50℃(Packed Condition)
-40℃ ~ + 105℃
Characteristic
impedance
50Ω (0 to 3GHz)
Rating
Power
---W
---
Applicable
cable
-
Peculiarity
SPECIFICATIONS
TEST METHOD
ITEM
CONSTRUCTION
General examination
REQUIREMENTS
QT AT
According to drawing.
Visually and by measufing instrument.
Confirmed visually.
O
O
O
O
Marking
ELECTRICAL CHARACTERISTICS
Contact resistance
Insulation resistance
Mate applicable connector and apply a current of
Center contact : 30 mΩ Max.
Outer contact : 30 mΩ Max.
(Except for resistance of cable.)
100 MΩ Min.
1 mA AC(Or 1,000Hz).
O
-
Mate applicable connector and apply a voltage of
DC 500 V.
O
O
-
-
Voltage proof
Mate applicable and apply a voltage of
AC 500 V for 1 min.
No flashover or breakdown.
VSWR 1.5 Max.
Voltage standing wave ratio
Frequency 0 to 3GHz.
O
-
MECHANICAL CHARACTERISTICS
Mechanical operation
30 times insertions and extractions.
① Contact resistance
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
(Except for resistance of cable.)
O
-
② No damage, crack and looseness of parts.
① No electrical discontinuity of 1㎲.
980 m/s2 direction of pulse 6ms at 10 times
in 3 directions.
Shock
② Contact resistance
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
-
-
(Except for resistance of cable)
③ No damage, crack and looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid change of temperature
Temperature : -40±2 → 15~35 → +105±2 → 15~35 ℃ ① Contact resistance
(NOTE 1)
Time :
Under 200 cycles.
Exposed at 25±2 ℃, 65 % 25 h.
30
→
5
→
30
→ 5 min
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
Damp heat, cycle
(NOTE 1)
(Except for resistance of cable)
② No damage, crack or looseness of parts.
③ Insulation resistance : 10 MΩ Min.
O
-
Under 10 cycles.
Drawn
Designed
Checked
Approved
Released
Remarks conditions for testing
ENG
D.G KIM
D.G KIM
H.S LEE
T. NOBE
19.08.30
DEPT
15.11.03
15.11.03
15.11.03
15.11.03
Unless otherwise specified, refer to JIS C 5402.
Note QT: Qualification test AT: Assurance test O: Applicable test
Part No.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
POK15-R-SMT(895)
CL 6341-0009-5-895
F-1-021(Rev.0)
Code No.(OLD)
Drawing No.
Code No.
1
2
ELC4-632242
CL