New Product Announcement!
Ultra Low Noise MMIC Amplifier
PMA-5451+
50Ω
0.05 to 6 GHz
Click
here for
data sheet
The Big Deal
• Ultra Low Noise Figure, 0.6 dB
• High IP3/Low Current, 30mA
• Wideband, up to 6 GHz
3mm x 3mm MCLP (EIA: QFN) Pkg
Pricing:$1.49 (QTY 20)
Product Overview
Mini-Circuits PMA-5451+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to
6 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive receiver
applications. This design operates on a single 3V supply at only 30mA and is internally matched to 50
Ohms.
Key Features
Feature
Advantages
Ultra Low Noise,0.6 dB
Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise
Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic
range: sensitivity & two-tone spur-free dynamic range
High IP3, 29 dBm
At only 30mA, the PMA-5451+ is ideal for remote applications with limited available power or
densely packed applications where thermal management is critical.
Low Current, 30mA
Broad Band
Operating over a broadband the PMA-5451+ covers the primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
No external matching elements required to achieve the advertised noise and output power over the
full band
Internally Matched
MCLP Package
Low Inductance, repeatable transitions, excellent thermal pad
Max Input Power, +20dBm
Ruggedized design operates up to input powers of +20dBm without the need of an external limiter
Low, small signal operating current of 30 mA nominal maintains junction temperatures typically
below 100°C at 85°C ground lead temperature
High Reliability
®
For detailed performance specs
& shopping online see web site
Mini-Circuits
ISO 9001 ISO 14001 AS 9100 CERTIFIED
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 The Design Engineers Search Engine
Provides ACTUAL Data Instantly at minicircuits.com
IF/RF MICROWAVE COMPONENTS
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”);Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
Page 1