PM5441 DIGI 60G
High-Capacity 6x10G / 40G Multi-Service OTN Processor
The PM5441 DIGI 60G is part of Microsemi's 3rd generation Metro OTN
processing solution for Wavelength Division Multiplexing (WDM) Platforms,
Reconfigurable Optical Add-Drop Multiplexers (ROADMs), and Packet
Optical Transport Platforms (P-OTP/PE-OTNs). The PM5441 DIGI 60G is a
high-capacity, channelized, single-chip solution that provides a high level of
flexibility and feature-integration to enable Metro OTN switching and transport
deployments. The DIGI 60G enables power and cost efficient 6x10G / 40G
line cards for OTN switching systems, and Transponder/ Muxponder/ADM
cards with integrated ODU0/ODUflex support for OTN transport systems.
Highlights
Unprecedented service delivery and network
deployment flexibility:
• Supports the widest range of multi-service
client mappings into OTN
• Delivers industry-leading 9.45dB "Swizzle"
40G/100G EFEC Multi-stage OTN multiplexing
enables compatibility and interoperability
between network nodes
The DIGI 60G provides a rich set of framing, mapping, multiplexing and
switching resources for a variety of rates and protocols including OTN,
SONET/SDH, Ethernet and Fiber Channel. It can be leveraged easily across
multiple applications and multiple equipment platform types to reduce OEM
development cost and accelerate time to market. It can also leverage hardware
and software from the DIGI 120G, which is a higher capacity device from the
same product family.
• Enables full SNCP-based protection switching
for ring, point-to-point, or meshed network
topologies
Universal line card solution simplifies service
provider network deployment and inventory
management, providing OPEX and CAPEX
savings.
The DIGI 60G delivers the following key technologies and capabilities:
Optimized power and footprint for OEMs:
Integrated ODU0/ODUflex Framing, Mapping and Switching:
• Connects directly to a wide range of 10G, 40G,
and 100G optical module types including XFP,
SFP+ (limiting), QSFP and 40G/100G MSAs
Supports up to 48x ODU0/ODUflex channels to enable efficient scaling and
transport of packet bandwidth without affecting service
Industry-leading 9.45dB Gain Swizzle Enhanced FEC:
• Generates all client protocols and device
interface rates from internal PLLs with a single
external reference clock
High performance and low latency Forward Error Correction (FEC) algorithm
delivers 9.45dB of coding gain for 40G OTN links
OIF Compliant OTN-Over-Packet Fabric Protocol:
• Delivers a single-chip "platform" solution for
multiple line card applications across multiple
system platforms
Enables OEMs to deliver high-capacity OTN/Hybrid/Packet switching line cards
using off-the-shelf or proprietary switch fabric solutions
• Provides glueless interconnect to many off-the-
shelf NPs and switch fabrics
Carrier Ethernet Transport:
Onboard Ethernet MACs provide support for Timing over Packet (IEEE 1588v2/
PTP), Synchronous Ethernet (SyncE) and Ethernet Link OAM (IEEE 802.3ah) on
every port
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability
whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction
with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone
and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability
of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.
Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in
this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.