PM5337
ADM 622
Preliminary
Integrated Add/Drop Multiplexer for 622 Mbit/s and 155 Mbit/s
SONET/SDH INTERFACE
FEATURES
• Integrated Message Assisted
Protection Switching (MAPS)
processing for a fully hardware based
automatic UPSR path selection
• Two multi-rate SONET/SDH interfaces
capable of operation at 155 or
622Mbit/s
• Fully integrated solution for OC-
3/STM-1 or OC-12/STM-4 Add/Drop or
Terminal Multiplexers
• Integrated clock recovery allowing
direct interface to low-cost multi-rate
optical transceivers
• Integrated clock synthesis generates
line clock from 77.76MHz reference
• Auxiliary telecombus interface allows
interface to line-side SONET/SDH
framer, such as PM5319
• Complies with Bellcore, ANSI, and ITU
specifications for Jitter Tolerance,
Transfer, and Generation
• Full access to all SONET/SDH
Overhead bytes
• Highly channelized PDH and Ethernet
Client transport interfaces enable
deployment of converged networking
architectures on a single platform
• Integrated dual SONET/SDH
interfaces each with 622Mbit/s high
order and low order Tributary Unit
Pointer Processing (TUPP)
• Full VT/TU ring closure for line
protection
• Parallel Telecombus and Serial
622Mbit/s or 2.5Gbit/s ESSI interfaces
for client interface scalability and
driving backplane interfaces
• Integrated 2.5 Gbit/s STS/AU/VT/TU
cross-connect allowing for future
system expansion and addition of
transport interfaces
• Optimized architecture for single card
platforms or cost effective, multi-
service card in larger MSPPs via
622Mbit/s or 2.5Gbit/s ESSI backplane
interface
LOW / HIGH ORDER CROSS-
CONNECT
• Integrated 2.5Gbit/s non-blocking
memory based cross-connect
supporting anycast traffic
• Support switching at STS/AU/VT/TU
level and all legal concatenations
• Integrated MAPS processing for
automated hardware based protection
switching
PDH INTERFACES
• 28xT1 or 21xE1 framers with VT/TU
Mapping or integrated M13
Multiplexing
• 3xDS-3, E-3 or EC-1 framers and
mappers (per port selectable) with bi-
directional performance monitoring
and signaling
• High order path processing to STS-
1/AU-3/TU-3 level
• Low order path processing to
VT1.5/VT2/TU-11/TU-12 level
• One port of DS-3 Transmux into up to
28 VT1.5
BLOCK DIAGRAM SONET/SDH Overhead/
8x SS-
SMII/SMII
1x GMII
Interface
External RAM
Interface
Alarm Interface
SONET/SDH Network Interface
System Interface
Ethernet Over SONET/SDH
DDR
Processor
TX STS
Bypass
MAC
MAC
Drop Parallel
Telecombus
TX
Line
IF
TX STS TX HO
TX HO
Pointer
Interpreter
PLD
OH
Add Parallel
Telecombus
GFP/PPP Encapsulation
LO/HO VCAT/LCAS
Aligner
Gen
Line
CSU
PRBS
Drop Serial
Interface
(4)
HO/LO Crossconnect
RX HO RX STS RX LO RX LO
Pointer PLD Pointer PLD
InterpreterAligner Interpreter Aligner
Add Serial
Frame
RX
Line
IF
Input
MUX
Interface
and
PMON
.
.
.
.
(4)
.
.
Controller
DS1/E1/DS3/E3/EC-1
Client Interface
Alarm Controller
DS-3 / E-3 / EC-1 to
STS/AU/TUG3
Mapper
DS-1 / E-1 to
VT/TU or M13
Mapper
JTAG
Interface
Microprocess
Microprocessor Interface
or Interface
28xDS-1
21xE-1
3x EC-1/DS-3/E-3
PMC-2030421
Issue 2
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC.,
© Copyright PMC-Sierra, Inc. 2004
All rights reserved.
AND FOR ITS CUSTOMERS’ INTERNAL USE