SMT Power Inductors
High Current Composite Inductor - PA5001.XXXNLT and PM2201.XXXNLT
POWER PRODUCTS
Height: 2.1mm Max
I
A
9
4
T
9
F
Footprint: 4.3mm x 4.3mm Max
Current Rating: up to 38Apk
Inductance Range: 0.10uH to 2.20uH
High current, low DCR, and high efficiency
High reliability
Minimized acoustic noise and minimized leakage flux noise
Available in Commercial (PA5001) and Automotive
(PM2201) grades
Electrical Specifications @ 25°C, Operating Temperature Range -55°C to +155°C
Rated3
Current
Saturation2
Current
Part Number
DC Resistance
Inductance
100KHz, 0.1V
K Factor
for
Core Loss
T Y P.
mΩ
2.2
MAX.
mΩ
2.42
4.6
Commerical
Automotive6
uH 20ꢀ
0.10
A
18
A
PA5001.101NLT
PA5001.221NLT
PA5001.361NLT
PA5001.401NLT
PA5001.471NLT
PA5001.561NLT
PA5001.601NLT
PA5001.721NLT
PA5001.102NLT
PA5001.122NLT
PA5001.152NLT
PA5001.182NLT
PA5001.222NLT
PM2201.101NLT
PM2201.221NLT
PM2201.361NLT
PM2201.401NLT
PM2201.471NLT
PM2201.561NLT
PM2201.601NLT
PM2201.721NLT
PM2201.102NLT
PM2201.122NLT
PM2201.152NLT
PM2201.182NLT
PM2201.222NLT
33
947.4
602.9
442.1
442.1
-
0.22
0.36
0.40
0.47
16.8
14.5
14
4.1
18.8
15.0
13.5
13.0
12.6
12.3
10.6
8.8
7.8
5.6
6.3
6.9
7.73
8.58
9.3
12.5
12
7.8
0.56
0.60
0.72
1.00
1.20
8.4
349
11.7
10.5
9.6
9
8.6
9.52
11.6
14.6
17.9
23.5
28
-
10.4
13.3
16.2
21.0
25.0
35.2
288.3
245.6
213.9
189.5
170
1.50
7.6
7
7.4
1.80
2.20
7.0
5.6
38.7
6.0
-
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
2. The saturation current is the current at which the initial inductance is guaranteed
to drop by no more than 40%. The typical inductance at a specified current can be
found on the typical performance curves.
5. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse
for availablity.
3. The rated current is the DC current required to raise the component temperature by
approximately 40�C. Take note that the components’ performanc varies depending 6. The PM2201.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 155�C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
mechanical dimensions are 100% tested in production but do not necessarily meet a
product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP.
7. Special Characteristics
Power.PulseElectronics.com
P806.C (07/20)
1