PLED120W Series– Fixed Output & Dimmable
Flicker-Free LED Drivers
Constant Current & Constant Voltage with Isolation
Black Magic Thermal Advantage™ Aluminum Housing
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Current Accuracy:
Load Regulation:
THD:
>0.90 @ > 70% load, 120-277V
60.0 Amps max @ 277 Vac, cold start, full load
0.60 Amps max @ 230 Vac, 1.20 A max @ 120 Vac
120W
± 3%
± 4%
<_ 20% @ > 70% load, 120-277V
• Total Power: 120 Watts
• Input Voltage: 100-277 Vac Nom.
• UL Dry & Damp Location Rated
• IP66 & NEMA6
• UL Type HL Rated for Hazardous Locations
• UL Sign Components Manual (S.A.M. Models)
Ripple & Noise:
(Vpk-pk)
5% Vo max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μF Electrolytic
Ripple:
(Ipk-pk)
5% Io max @ 20 MHz BW, Full load output
in parallel with 0.1 μF ceramic & 10 μFElectrolytic.
120 Hz component (Flicker Free)
Start-up Time:
150mS typical @ Full Load, 120Vac/60Hz (1000mS max)
0.68 mA max @ 120Vac, 0.75 mA max @ 277Vac
30mS typical @ Full Load, 277Vac
Constant Current Versions - Product Specifications
Leakage Current:
Hold Up Time:
Output Current Output Voltage Max Output
Typical
Power (W) Efficiency
Model Number
(mA ±5%)
Range (Vdc)
114-343
89-266
57-171
38-114
29-86
Output Protection:
Over-Voltage, Over-Current, and Short Circuit
(auto-recovery)
PLED120W-343-C0350-XX
PLED120W-266-C0450-XX
PLED120W-171-C0700-XX
PLED120W-114-C1050-XX
PLED120W-086-C1400-XX
PLED120W-068-C1750-XX
PLED120W-057-C2100-XX
PLED120W-049-C2450-XX
PLED120W-043-C2800-XX
PLED120W-038-C3150-XX
PLED120W-034-C3500-XX
PLED120W-028-C4200-XX
PLED120W-024-C5000-XX
350
120
120
120
120
120
120
120
120
120
120
120
120
120
92%
92%
91%
91%
91%
91%
90%
90%
90%
90%
89%
89%
89%
450
Environmental Specifications
Minimum Starting Temp: -30ºC
700
1050
1400
1750
2100
2450
2800
3150
3500
4200
5000
Maximum Case Temp.
Storage Temperature:
Humidity:
90°C
23-68
-40ºC to +85ºC
5% to 95%
19-57
17-49
Cooling:
Convection
15-43
13-38
Vibration Frequency:
MTBF:
5-55 Hz/2g, 30 minutes
12-34
280,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
10-28
8-24
EMC:
FCC 47CFR Part 15 Class B compliant
-XX indicates dimming options are available. See options at left. Blank = fixed current output
Impact Resistance:
Weight:
1g/s
24.4 oz (690 grams)
Constant Voltage Versions - Product Specifications
Output Voltage Output Current Max Output
Typical
Efficiency
Model Number
Ordering Options:
(Vdc ±5%)
Range (mA)
1250-5000
1050-4200
875-3500
788-3150
700-2800
613-2450
525-2100
438-1750
350-1400
263-1050
175-700
Power (W)
PLED120W-024
PLED120W-028
PLED120W-034
PLED120W-038
PLED120W-043
PLED120W-049
PLED120W-057
PLED120W-068
PLED120W-086
PLED120W-114
PLED120W-171
PLED120W-266
PLED120W-343
24
120
89%
89%
-D: 0-10V & Resistance dimmable models dim 100-10%. Two extra wires on the output
•
side (+Purple/-Gray). Compatible with most quality 0-10V wall dimmers. See page 3.
28
120
-D3: 3-wire dimmable models dim 100-10%. Three extra wires on the output side
34
120
89%
(Yellow/Purple/Gray). Compatible with potentiometer dimming. See page 3.
38
120
90%
-PD: PWM Dimmable models. Two extra wires on the output side(+Purple/-Gray). Dims
43
120
90%
via positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4.
49
120
90%
57
120
90%
68
120
91%
86
120
91%
114
171
266
343
120
91%
120
91%
E332160
113-450
120
92%
88-350
120
92%
•
Indicates S.A.M.
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com