1
Redraw.
Applicable standard
Operating
temperature range
Storage
-55°C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
Characteristic
impedance
Applicable
cable
- W
-
75 Ω ( 0 to 3
GHz)
1
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
X
-
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max. (DC or 1000 Hz)
Center contact 8 mΩ Max.
Outer contact 6 mΩ Max.
1000 MΩ Min.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 60 sec current leakage 2 mA Max.
Frequency 0 to 1.5
Frequency 1.5 to 3
No breakdown.
GHz.
GHz.
VSWR
VSWR
1.3 Max.
1.5 Max.
1
1
1
1
X
-
-
-
Insertion loss
Frequency - to - GHz.
- dB Max.
MECHANICAL CHARACTERISTICS
0
0.49
by steel gauge.
Contact insertion and
extraction forces
Insertion and
Φ
Insertion force
- N Max.
-
X
-
-
X
-
-0.005
Extraction force 0.5 N Min.
Insertion force - N Max.
Measured by applicable connector.
500 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force - N Min.
1)Contact resistance:
-
-
Center contact 13 mΩ Max.
Outer contact 11 mΩ Max.
2)No damage, crack and looseness of parts.
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
-
Vibration
Shock
-
-
X
X
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 96 %,
Total 10 cycles (240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.3 Max. (Frequency 0 to 1.5 GHz.)
1
VSWR 1.5 Max. (Frequency 1.5 to 3 GHz.)
1
Count
8
Description of revisions
DIS-D-00018760
Designed
MK.INOUE
Checked
TS.NOBE
Date
20240524
1
KY.SHIMIZU
TO.KATAYAMA
MT.KANEKO
MT.KANEKO
20060414
Remark
Approved
Checked
Designed
Drawn
20060414
20060407
20060407
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-028041-40-40
PL71-LR-PC(40)
SPECIFICATION SHEET
1
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0334-0016-2-40
FORM HD0011-2-1