5秒后页面跳转
PIM-SS PDF预览

PIM-SS

更新时间: 2024-09-20 06:03:39
品牌 Logo 应用领域
GAMEWELL-FCI 监视器
页数 文件大小 规格书
2页 180K
描述
Ten-Input Monitor Module

PIM-SS 数据手册

 浏览型号PIM-SS的Datasheet PDF文件第2页 
Features  
PIM-SS  
Ten addressable Class B or  
five addressable Class A  
initiating device circuits.  
Ten-Input Monitor Module  
• Removable 12 AWG (3.25  
mm²) to 18 AWG (0.9 mm²)  
plug-in terminal blocks.  
Description  
Gamewell’s SmartScanTM PIM-SS ten-  
• Use with Gamewell’s IF602,  
610, 632, 654 and 658 with  
SmartScan™ loop card.  
input monitor module provides an  
interface between a control panel  
and normally open contact devices  
in intelligent alarm systems such as  
conventional pull stations and heat  
detectors.  
• Status indicators for each  
point.  
• Unused addresses may be  
disabled.  
The first address on the PIM-SS is  
set from 01 to 90 and the remaining  
modules are automatically assigned  
to the next nine higher addresses.  
Provisions are included for disabling  
a maximum of two unused ad-  
dresses.  
• Rotary address switches.  
• Class A or Class B operation.  
• Mount one or two modules in a  
BB-XP cabinet (optional).  
• Mount up to six modules on a  
CHS-6 chassis in a BB-25  
cabinet (optional).  
The supervised state (normal, open,  
or short) of the monitored device is  
• Mounting hardware included.  
sent back to the panel. A common SLC input is used for all modules, and the  
initiating device loops share a common supervisory supply and ground — other-  
wise each monitor operates independently from the others.  
Each PIM-SS module has panel-controlled green LED indicators. The panel can  
cause the LEDs to blink, latch on, or latch off.  
Listings  
Listings and approvals below  
apply to the PIM-SS Ten-Input  
Monitor Module. In some  
cases, certain modules may  
not be listed by certain ap-  
proval agencies, or listing may  
be in process. Consult factory  
for latest listing status.  
Product Line Information  
PIM-SS: Ten-input monitor module.  
BB-25: Optional cabinet for up to six modules mounted on CHS-6 chassis (be-  
low). Dimensions, DOOR: 24.0" (60.96 cm) wide x 12.632" (32.0852 cm) high, x  
1.25" (3.175 cm) deep, hinged at bottom; BACKBOX: 24.0" (60.96 cm) wide x  
12.550" (31.877 cm) high x 5.218" (13.2537 cm) deep.  
• UL Listed: file S521.  
• CSFM approved:  
file 7300-1288:169.  
CHS-6: Chassis, mounts up to six modules in a BB-25 cabinet.  
• MEA approved:  
file 368-01-E Vol. II.  
PIM-SS CS-2468 09/01/06  
Page 1 of 2  

与PIM-SS相关器件

型号 品牌 获取价格 描述 数据表
PIMT1 NXP

获取价格

PNP general purpose double transistor
PIMT1 NEXPERIA

获取价格

PNP general purpose double transistorProduction
PIMX8MM1CVTKZAA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Consumer Products
PIMX8MM1CVTKZCA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Consumer Products
PIMX8MM1CVTKZDA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Industrial Products
PIMX8MM1CVTLZAA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Industrial Products
PIMX8MM1CVTLZCA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Consumer Products
PIMX8MM1CVTLZDA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Consumer Products
PIMX8MM1DVTKZAA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Consumer Products
PIMX8MM1DVTKZCA NXP

获取价格

i.MX 8M Mini Applications Processor Datasheet for Industrial Products