A Product Line of
Diodes Incorporated
b
P
Lead-free Green
PI90LV02A
SOTinyTM LVDS High-Speed Differential Line Receiver
Features
Description
y
ꢀ
Meets or Exceeds the Requirements of ANSI TIA/EIA-644- e DIODES™ PI90LV02A is single differential line receiver that
uses low-voltage differential signaling (LVDS) to support data
rates up to 680 Mbps. is device is designed for applications
requiring high-speed, low-power consumption, low-noise gen-
eration, and a small package.
A differential input signal (350mV) is translated by the device to
a 3.3V CMOS output level. e PI90LV02A requires an external
resistor.
1995 Standard
y
y
y
y
y
y
y
y
y
y
y
y
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Signaling Rates Up to 680 Mbps
Interfaces to LVDS, LVPECL
Bus-Terminal ESD exceeds 2kV
Differential Input Voltage reshold less than 100mV
Typical Propagation Delay Times of 2.6ns
Typical Power Dissipation of 85mW @340 MHz
Low Voltage TTL (LVTTL) Level is 5V Tolerant
Open-Circuit Fail Safe
Application(s)
Output are High Impedance with VCC <1.5V
Operates from a 3.3V supply
Input common-mode voltage range 0V–3.2V
Extended Industrial Temperature Operating Range: –40°C to
105°C
Applications include point-to-point and multi-drop baseband
data transmissions over impedance media of approximately
100Ω. e transmission media can be printed circuit board trac-
es, backplanes, or cables.
y
y
y
The PI90LV02A and companion line drivers (The DIODES™
PI90LV01A) provide new alternatives to RS-232, PECL, and ECL
devices for high-speed, point-to-point interface applications.
ꢀ
ꢀ
ꢀ
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change control
(i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable,
and manufactured in IATF 16949 certified facilities), please
contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Packaging (Pb-free & Green available):
Block Diagram
y
ꢀ
3
A
àꢀ
5-pin space-saving SOT23 (T)
5
R
OUT
4
B
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm
antimony compounds.
November 2022
© 2022 Copyright Diodes Incorporated. All Rights Reserved.
PI90LV02A
www.diodes.com
1
Document Number DS44655 Rev 2-2