A product Line of
Diodes Incorporated
b
P
Lead-free Green
PI7C9X752
High Performance 1.62V To 3.6V Dual Uart with 64-Byte FIFO
Description
Features
e PI7C9X752 (752), is a 1.62V to 3.6V dual Universal Asyn-
chronous Receiver and Transmitter (UART) with 5V tolerant se-
rial (modem) inputs. e highly integrated device is designed for
high bandwidth requirement in communication systems. Each
UART has its own 16C550 compatible set of configuration regis-
ters, TX and RX FIFOs of 64 bytes, fully programmable transmit
and receive FIFO trigger levels, TX and RX FIFO level counters,
automatic RTS/CTS hardware flow control with programmable
hysteresis, automatic soꢀware (Xon/Xoff) flow control, RS-485
half-duplex direction control, Intel or Motorola bus interface and
sleep mode for power saving.
ꢀÎ1.62V to 3.6V with 5V Tolerant Serial Inputs
ꢀÎProgrammable Sleep Mode with automatic wake-up
à Intel or Motorola Data Bus Interface select
ꢀÎEach UART is independently controlled with:
à 16C550 Compatible Register Set
à 64-byte Transmit and Receive FIFOs
à Transmit and Receive FIFO Level Counters
à Programmable TX and RX FIFO Trigger Levels for
DMA and Interrupt Generation
→ Programmable Receive FIFO Trigger Levels for
Soꢀware/Hardware Flow Control
→ Programmable hysteresis(Table A-D) for Soꢀware/
Hardware Flow Control
Application
à Automatic RTS/CTS Flow Control
à Automatic Xon/Xoff Soꢀware Flow Control with
Optional Data Flow Resume by Xon Any Character
→ DMA Signaling Capability for both Received and
Transmitted Data
ꢀÎRemote Access Servers
ꢀÎEthernet Network to Serial Ports
ꢀÎNetwork Management
ꢀÎFactory Automation and Process Control
ꢀÎPoint-of-Sale Systems
à RS485 HDX Control Output
à RS485 auto address detection
ꢀÎMulti-port RS-232/RS-422/RS-485 Cards
à Infrared (IrDA 1.0/1.1) Data Encoder/Decoder
à Programmable Data Rate with Prescaler
ꢀÎUp to 16 Mbps Serial Data Rate with 64MHz external clock
input
ꢀÎCrystal oscillator(up to 24MHz) or external clock(up to
80MHz) input
ꢀÎBuilt in Power-On-Reset circuit
ꢀÎTotally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
ꢀÎHalogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm
antimony compounds.
www.diodes.com
April 2019
Diodes Incorporated
PI7C9X752
Document Number DS40312 Rev 3-2
1