PHR
Vishay Sfernice
www.vishay.com
ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %),
Thin Film Chip Resistors
FEATURES
• Load life stability at 70 °C for 2000 h:
0.15 % under Pn
• Low temperature coefficient down to 5 ppm/°C
• Very low noise (< -35 dB) and voltage coefficient
(< 0.01 ppm/V)
• Resistance range: 10 to 3 M (depending on size)
click logo to get started
DESIGN SUPPORT TOOLS
• Laser trimmed tolerances to 0.01 %
• TCR in lot tracking 5 ppm/°C
Models
Available
• Termination: Thin film technology
• SnPb terminations over nickel barrier
Vishay Sfernice Thin Film division holds ESCC QML
• ESCC 4001 (generic specifications)
• ESCC 4001/023 (detailed specifications)
• ESCC qualified
qualification (ESCC technology flow qualification).
These High-Rel. components are ideal for low noise and
precision applications, superior stability, low temperature
coefficient of resistance, and low voltage coefficient, Vishay
Sfernice’s precision thin film wraparound resistors exceed
requirements of MIL-PRF-55342G characteristics
( 10 ppm/°C).
• SMD wraparound chip resistor
• Operating temperature range: -65 °C to +155 °C
• From 0402 to 2010
Y
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
RATED
LIMITING
INSULATION
ESCC
SIZE VARIANT
NUMBER
RESISTANCE
RANGE
POWER
ELEMENT
VOLTAGE
(UL)
TEMPERATURE
COEFFICIENT
ppm/°C
VOLTAGE
TOLERANCE
%
MODEL
AT + 70 °C
(Pn)
(Ui)
V
W (1)
V (1)
PHR 0402
PHR 0603
PHR 0805
PHR 1206
PHR 2010
0402 13 and 14
0603 01 and 05
0805 02 and 06
1206 03 and 07
2010 04 and 08
10 to 150K
10 to 500K
10 to 750K
10 to 3.5M
10 to 6M
0.05
0.1
30
35
50
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
5, 10, 25
5, 10, 25
5, 10, 25
5, 10, 25
5, 10, 25
100
200
300
300
0.125
0.25
0.50
75
100
150
Note
(1)
Limiting voltages and power rating are already derated (for maximum ratings admissible, refer to P chip: www.vishay.com/cod?53017)
CLIMATIC SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Substrate material
Alumina
Operating temperature
range
-65 °C; +155 °C
Technology
Thin film
Soldering temperature
Nickel chromium with mineral
passivation
260 °C, immersion 10 s
Film
(Tsol
)
Protection
Epoxy and silicone
B type: SnPb over nickel barrier
Terminations
for solder reflow (1)
G type: gold over nickel barrier
Note
(1)
For B terminations use recommended reflow profile #1 as per
Application Note “Guidelines for Vishay Sfernice Resistive and
Inductive Components” (document number: 52029)
Revision: 03-Jan-2019
Document Number: 53037
1
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000