5秒后页面跳转
PCA9506BS PDF预览

PCA9506BS

更新时间: 2024-02-03 07:35:56
品牌 Logo 应用领域
恩智浦 - NXP 并行IO端口微控制器和处理器外围集成电路
页数 文件大小 规格书
30页 163K
描述
40-bit I2C-bus I/O port with RESET, OE, and INT

PCA9506BS 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:TSSOP, TSSOP56,.3,20Reach Compliance Code:unknown
风险等级:5.75JESD-30 代码:R-PDSO-G56
位数:40端子数量:56
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP56,.3,20封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH电源:2.5/5 V
认证状态:Not Qualified子类别:Parallel IO Port
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子形式:GULL WING
端子节距:0.5 mm端子位置:DUAL
Base Number Matches:1

PCA9506BS 数据手册

 浏览型号PCA9506BS的Datasheet PDF文件第2页浏览型号PCA9506BS的Datasheet PDF文件第3页浏览型号PCA9506BS的Datasheet PDF文件第4页浏览型号PCA9506BS的Datasheet PDF文件第5页浏览型号PCA9506BS的Datasheet PDF文件第6页浏览型号PCA9506BS的Datasheet PDF文件第7页 
PCA9506  
40-bit I2C-bus I/O port with RESET, OE, and INT  
Rev. 01 — 14 February 2006  
Product data sheet  
1. General description  
The PCA9506 provides 40-bit parallel input/output (I/O) port expansion for I2C-bus  
applications organized in 5 banks of 8 I/Os. At 5 V supply voltage, the outputs are capable  
of sourcing 10 mA and sinking 25 mA with a total package load of 800 mA to allow direct  
driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. Output  
ports are totem-pole and their logic state changes at the Acknowledge (bank change).  
The device can be configured to have each input port to be masked in order to prevent it  
from generating interrupts when its state changes and to have the I/O data logic state to  
be inverted when read by the system master.  
An open-drain interrupt (INT) output pin allows monitoring of the input pins and is  
asserted each time a change occurs in one or several input ports (unless masked).  
The Output Enable (OE) pin 3-states any I/O selected as output and can be used as an  
input signal to blink or dim LEDs (PWM with frequency > 80 Hz and change duty cycle).  
The internal Power-On Reset (POR) or hardware reset (RESET) pin initializes the 40 I/Os  
as inputs. Three address select pins configure one of 8 slave addresses.  
The PCA9506 is available in 56-pin TSSOP and HVQFN packages and is specified over  
the 40 °C to +85 °C industrial temperature range.  
2. Features  
Standard mode (100 kHz) and Fast mode (400 kHz) compatible I2C-bus serial  
interface  
2.3 V to 5.5 V operation with 5.5 V tolerant I/Os  
40 configurable I/O pins that default to inputs at power-up  
Outputs:  
Totem-pole (10 mA source, 25 mA sink) with controlled edge rate output structure  
Active LOW output enable (OE) input pin 3-states all outputs  
Output state change on Acknowledge  
Inputs:  
Open-drain active LOW interrupt (INT) output pin allows monitoring of logic level  
change of pins programmed as inputs  
Programmable Interrupt Mask Control for input pins that do not require an interrupt  
when their states change  
Polarity Inversion register allows inversion of the polarity of the I/O pins when read  
Active LOW reset (RESET) input pin resets device to power-up default state  
3 programmable address pins allowing 8 devices on the same bus  

与PCA9506BS相关器件

型号 品牌 描述 获取价格 数据表
PCA9506BS,118 NXP PCA9505/06 - 40-bit I2C-bus I/O port with RESET, OE and INT QFN 56-Pin

获取价格

PCA9506DGG NXP 40-bit I2C-bus I/O port with RESET, OE, and INT

获取价格

PCA9506DGG,512 NXP PCA9505/06 - 40-bit I2C-bus I/O port with RESET, OE and INT TSSOP 56-Pin

获取价格

PCA9506DGG,518 NXP PCA9505/06 - 40-bit I2C-bus I/O port with RESET, OE and INT TSSOP 56-Pin

获取价格

PCA9507 NXP 2-wire serial bus extender for HDMI DDC I2C-bus and SMBus

获取价格

PCA9507D NXP 2-wire serial bus extender for HDMI DDC I2C-bus and SMBus

获取价格