PEN6-xxxxE/Z4:1LF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
PEN-SERIES
ꢀ 4-6 Watt
ꢀ 4:1 Ultra Wide Input
ꢀ Reg. Single and Dual Output
ꢀ DIP24 Metal Case
Rev.09-2009
ꢀ 1.5 kV DC I/O Isolation
ꢀ Continuous Short Circuit Prot.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
4:1 Ultra Wide Input
Pi Type
35 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation
1%
Indefinite (automatic recovery)
0.5%
0.5% /
60 mV pk-pk
0.02% / °C
1.5% (only 3.3 / 3.3 Vout Models)
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
General Specifications
Efficiency
See Table
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency (typical)
Humidity
1500 VDC
500 pF, typ.
1000 MOhm
266 kHz, typ.
95% rel H
Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Nickel Coated Copper
Epoxy (UL94V-0 rated)
~ 17g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
-40 to +85°C (ambient)
100°C
-40 to +125°C
Free Air Convection (10mm distance required)
Soldering 260°C, max. (1.5mm from case 10s.)
RoHS Conform
PEN-Series – PEN6-xxxxE/Z4:1LF – Single and Dual Output – DIP24 - Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3