1.2 dB NF Input Protected Low Noise Amplifier, Operating from
1 GHz to 1.4 GHz with 30 dB Gain, 10 dBm P1dB and SMA
TECHNICAL DATA SHEET
PE15A63006
PE15A63006 is an Input Protected Low Noise RF coaxial amplifier operating in the 1 GHz to 1.4 GHz frequency range. The
amplifier has a 1.2 dB typical noise figure and can handle up to 1 Watt CW input power without damage. Additional typical
performance includes 30 dB small signal gain, 1.5:1 VSWR, and +10 dBm P1dB. The exceptional technical performance is
achieved through the use of a 3 stage hybrid MIC assembly that incorporates a low loss input Pin Diode Limiter protective
circuit followed by gain stages that use Enhancement Mode (Emode) GaAs pHEMT devices. The 50 Ohm SMA connectorized
module is unconditionally stable, includes built-in DC voltage regulation, and supports DC blocking Capacitors on the RF
ports. The Amplifier operates with a bias voltage of +12V typical and over the temperature range of -40°C to +85°C. This model
is RoHS compliant and has an EAR99 export classification.
Features
• 1 GHz to 1.4 GHz Frequency Range
• P1dB: 10 dBm
• High Small Signal Gain: 30 dB typical
• Gain Flatness: ±1 dB
• 50 Ohm Input and Output Matched
• -40°C to +85°C Operating Temperature
• Single DC Positive Supply
• DC Blocking Capacitors
• Noise Figure: 1.2 dB typ
Applications
• R&D Labs
• Radar Systems
• Test Instrumentation
• Communication Systems
• IF Amplifier/RF Driver Amplifier
• RF Wideband Front Ends
Electrical Specifications (TA = +25°C, DC Voltage = 12Vdc, DC Current = 110mA)
Description
Minimum
Typical
Maximum
Units
Frequency Range
1
1.4
GHz
dB
Small Signal Gain
Gain Flatness
30
±1
dB
Gain Variance at OTR*
Output at 1 dB Compression Point
Noise Figure
±1.5
dB
+10
dBm
dB
1.2
1.4
2:1
2:1
-60
+30
Input VSWR
1.5:1
1.5:1
Output VSWR
Spurious
dBc
dBm
Volts
mA
Input Power (CW)
Operating DC Voltage
Operating DC Current
Operating Temperature Range
. .
12
110
-40
+85
°C
*OTR= Base Plate Operating Temperature Range
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 1 GHz to 1.4 GHz with 30 dB
Gain, 10 dBm P1dB and SMA PE15A63006
PE15A63006 REV 1.1
1