PE14TGI-xxxxZ2:1LF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
PME01-SERIES
ꢀ 3 Watt
ꢀ 2:1 Wide Input
Rev.04-2009
ꢀ Regulated
TheꢀPME01ꢁSeriesꢀareꢀspeciallyꢀdesignedꢀforꢀapplicationsꢀwhereꢀaꢀwideꢀ
rangeꢀinputꢀvoltageꢀpowerꢀsuppliesꢀareꢀisolatedꢀfromꢀtheꢀinputꢀpowerꢀsupplyꢀ
inꢀaꢀdistributedꢀpowerꢀsupplyꢀsystemꢀonꢀaꢀꢀcircuitꢀboard.ꢀTheseꢀproductsꢀ
applyꢀto:ꢀꢀ
1)ꢀWhereꢀtheꢀvoltageꢀofꢀtheꢀinputꢀpowerꢀsupplyꢀisꢀ≤ꢀ2:1ꢀrange.ꢀꢀ
2)ꢀWhereꢀisolationꢀisꢀnecessaryꢀbetweenꢀ(IsolationꢀVoltageꢀ≤ꢀ1KV)ꢀ
3)ꢀWhereꢀtheꢀregulationꢀofꢀtheꢀoutputꢀvoltageꢀandꢀtheꢀoutputꢀrippleꢀnoiseꢀ
areꢀdemanded.ꢀ
ꢀ DIP24 Plastic Case
ꢀ 1.5 KV DC I/O Isolation
ꢀ Dual Separate Output
ꢀ Continuous Short Circuit Prot.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
2:1 Wide Input
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
1%, typ (Main Out), 3%, typ (Vice Out)
Continuous (automatic recovery)
0.2%, typ.
Load Regulation (10% - 100% load)
Ripple (20Mhz bandwidth)
Noise (20Mhz bandwidth)
Temperature Coefficient
0.5%, typ.
20 mV pk-pk, typ.
75 mV pk-pk, typ.
0.03% / °C
General Specifications
Efficiency
See Table
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency (typical)
Humidity
1500 VDC
100 pF, typ.
1000 MOhm
300 kHz, typ.
95% rel H
Reliability Calculated MTBF (MIL-HDBK-217F) > 1 Mhrs
Physical Specifications
Case Material
Non Conductive Black Plastic (UL94V-0 rated)
Nickel Plated Steel* (optional – please add “M”LF)
Epoxy (UL94V-0 rated)
~ 15g, typ.
Potting Material
Weight
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
-40 to +85°C (ambient)
100°C
-55 to +125°C
Free Air Convection (10mm distance required)
Soldering 260°C, max. (1.5mm from case 10s.)
RoHS Conform
PME01-Series – PE14TGI-xxxxZ2:1LF –Dual Separate Output – DIP24 – Plastic/Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/4