PDU420
4A ULTRA-FAST RECOVERY RECTIFIER
ä
PowerDI 5
Features
Mechanical Data
ä
·
Case: PowerDI 5
·
·
·
·
Glass Passivated Die Construction
·
Case Material: Molded Plastic, “Green” Molding
Compound. UL Flammability Classification Rating 94V-0
Ultra-Fast Recovery Time for High Efficiency
High Maximum Junction Temperature
·
·
Moisture Sensitivity: Level 1 per J-STD-020C
For Use in Low Voltage, High Frequency Inverters, Free
Wheeling, and Polarity Protection Applications
Terminals: Finish – Matte Tin annealed over Copper
e3
leadframe. Solderable per MIL-STD-202, Method 208
Polarity: See Diagram on Page 4
Marking: See Page 3
·
·
·
·
High Forward Surge Current Capability
·
·
·
·
Lead Free Finish, RoHS Compliant (Note 1)
"Green" Molding Compound (No Br, Sb)
Qualified to AEC-Q101 Standards for High Reliability
Ordering Information: See Page 3
Weight: 0.096 grams (approximate)
TOP VIEW
BOTTOM VIEW
@ TA = 25°C unless otherwise specified
Maximum Ratings
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Value
Characteristic
Symbol
Unit
VRRM
VRWM
VR
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
200
V
VR(RMS)
IO
RMS Reverse Voltage
141
4
V
A
Average Rectified Output Current (See also figure 4)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
IFSM
125
A
Thermal Characteristics
Characteristic
Thermal Resistance Junction to Soldering Point
Thermal Resistance Junction to Ambient Air (Note 2)
Thermal Resistance Junction to Ambient Air (Note 3)
Thermal Resistance Junction to Ambient Air (Note 4)
Operating Temperature Range
Symbol
Typ
¾
Max
3.0
¾
Unit
°C/W
°C/W
°C/W
°C/W
°C
R
qJS
R
qJA
TA = 25°C
TA = 25°C
TA = 25°C
85
60
40
R
qJA
¾
R
qJA
¾
Tj
-65 to +175
-65 to +175
TSTG
Storage Temperature Range
°C
Notes:
1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Polymide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
DS30549 Rev. 7 - 2
1 of 4
PDU420
PowerDI is a trademark of Diodes Incorporated.
www.diodes.com
ã Diodes Incorporated