Datasheet > PDU-AA2N-D

PDU-AA2N-D

更新时间： 2024-11-27 02:07:19

品牌	Logo	应用领域
爱模 - MSYSTEM		/
页数	文件大小	规格书
4页	144K
描述
Plug-in Signal Conditioners M-UNIT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PDU-AA2N-D 数据手册

MODEL: PDU

Plug-in Signal Conditioners M-UNIT

[1] INPUT

A: Dry contact

B: Voltage pulse (Specify sensitivity)

C: 5 V pulse (sensitivity 2 V)

PULSE SCALER

(pulse dividing; selectable range)

D: 12 V/24 V pulse (sensitivity 5 V)

H: Two-wire current pulse

Functions & Features

• Galvanically isolating pulse rate signals and converting

them into convenient engineering unit

• Excitation

[2] OUTPUT

• Scaling factor adjustable with the front switches

• Uniform output pulse

A: Open collector (max. 100 kHz)

M: 5 V pulse (max. 100 kHz)

N: 12 V pulse (max. 100 kHz)

P: 24 V pulse (max. 100 kHz)

H: Relay contact (max. 5 Hz)

( ) = Max. frequency

• Various outputs (relay, open collector and voltage pulses)

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

• Positive displacement flowmeters and turbine meters

• Dry contact signal produced at rotating machine

[3] OUTPUT PULSE WIDTH

1: One-shot output (5 – 200 μsec.)

(Not selectable with relay contact.)

2: One-shot output (0.18 – 9 msec.)

(Not selectable with relay contact.)

3: One-shot output (9 – 400 msec.)

(1.97)

(3.15)

[4] OUTPUT LOGIC

N: The same as the input

R: Inverted

127

(5)

mm (inch)

[5] POWER INPUT

AC Power

MODEL: PDU–[1][2][3][4]–[5][6]

B: 100 V AC

C: 110 V AC

D: 115 V AC

F: 120 V AC

G: 200 V AC

H: 220 V AC

J: 240 V AC

ORDERING INFORMATION

• Code number: PDU-[1][2][3][4]-[5][6]

Specify a code from below for each of [1] through [6].

(e.g. PDU-CM1N-B/Q)

• Use Ordering Information Sheet (No. ESU-1368). Default

setting (table below) will be used if not otherwise specified.

• Specify the specification for option code /Q

(e.g. /C01/S01)

DC Power

S: 12 V DC

R: 24 V DC

Factory default setting

V: 48 V DC

ITEM

DEFAULT

Scaling factor 1 / (1X10 )

[6] OPTIONS

blank: none

Approx. 50% duty ratio at the max.

Output pulse input frequency (400 msec. max.);

/Q: With options (specify the specification)

width

Limited to the range indicated in Out-

put Pulse Width code 3 for relay output

Without;

For dry contact input with frequency

≤10 Hz, the ﬁlter is automatically

provided.

Filter

PDU SPECIFICATIONS

ES-1368 Rev.10 Page 1/4

http://www.m-system.co.jp/

12 3 4

中文翻译

下载PDF

与PDU-AA2N-D相关器件

型号	品牌	获取价格	描述	数据表
PDU-AA2N-D/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-F	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-F/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-G	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-G/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-H	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-H/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-J	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-J/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
PDU-AA2N-R	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT