®
Modular Economy Power-D-Box
Description
The Economy Power-D-Box® is a compact 2U power distribution
system made of aluminium.
Ordering information
PDB standard Power-D-Box® 19“ with interchangeable ETSI flange – 19“
protected pole
N
negative pole protected
Module
S2 X8340-S02L/R..-103*
S4 X8340-S0416-2*
SZ X8340-SZ4R/L..-101-00*
xx number of ways (total)
®
Economy Power-D-Box
PDB
-
N - S2 08
ordering example
*technical data on www.e-t-a.de
Technical data
Preferred types
19“ Power-D-Box®
length:
height:
material: aluminium
84 modules (426,72 mm)
2 U (88,90 mm)
Economy Power-D-Box®:
PDB - N - S2 12
2 x 6 ways
Rated voltage
DC 48 V; DC 65 V; DC 80 V
PDB - N - S2 16
2 x 8 ways
Fire resistance
(IEC 60695, Part 2-2)
self-extinguishing
PDB - N - SZ 08
PDB - N - SZ 16
2 x 4 ways
2 x 8 ways
Details of power distribution system:
X8340-S02
PDB - N - S4 08
2 x 4 ways
Load
25 A per position (30 A upon request)
132 A for complete unit
Features
Terminal design
2
Supply feed (terminal block) screw-terminal 6...50 mm ,
l
Plug-in type circuit breakers, 8340-F.10-P1...-H... , extendable in
multistrand,
supply 6...35 mm with wire end ferrule
service, with or without auxiliary contact, load per way for SZ
and/or S2 25 A (30 A upon request) for S4 20 A
Extremely compact design (installation depth 150 mm)
Standard redundant design (2 x 2, 2 x 4, 2 x 6, 2 x 8)
Group signalling for redundant line entry A and/or B is standard
To be used with industrially manufactured power distribution
modules(X8340-S02/S04/SZ4) – protected against brush contact
Labelling strips for individual marking
Blank covers (bulk shipped)
Integral cable clamp rail
Load output connector for SZ and/or S2 protected against
reverse polarity
Spring loaded terminals for S4
2
additional blade terminals
DIN 46244-A6,3x0,8
blade terminals 6.3x0.8 load output
terminal protected against reverse
polarity front
l
l
l
l
Load (module)
Signalling (module)
X8340-S04
Load
blade terminals DIN 46244-A4,8x0,8mm
l
l
l
l
20 A per position
80 A per module
Terminal design
Supply feed
screw terminal
l
l
supply 6...25 mm2 multistrand,
6...16 mm2 with wire end ferrule
screw-less terminal 0.5...2.5 mm2,
multistrand, with wire end ferrule, front
Other versions are available upon request (e.g. with series fuse,
separate circuits, single and redundant circuits,
customer-specific marking etc)
Load and signalling
X8340-SZ4
Load
25 A per position (30 A upon request)
150 A for the distribution system
6
Terminal design
Supply feed
copper busbar 10 x 3 mm
with hole ø 5.3 mm
current supply from the rear side
blade terminals 6.3 x 0.8 mm, load output
terminal protected against reverse polarity
on front and rear side
Loads
Signalling
signalisation 6.3 x 0.8 mm
plug-in direction as circuit breakers,
opposite the main terminal side
1646
www.e-t-a.de
1