50-65 WATT DC TO DC CONVERTERS
PD65 SERIES
DESCRIPTION
The PD65 series of DC/DC converters provide 50 to 65 watts
of continuous output power. Available in three standard input
range of 10-30 VDC, 20-60 VDC and 30-90 VDC, they are
ideal for a variety of applications including telecoms, process
control,
portable
equipment
and
vehicle
mounted
instrumentation. All units are available in compact “open PCB”
or “enclosed” mechanical formats.
FEATURES
‧ Low cost
‧ Small size, light weight
‧ 100﹪ burn-in
‧ Overvoltage protection
‧ Overcurrent protection
‧ Three wide input ranges:
10-30 VDC, 20-60 VDC and 30-90 VDC
INPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Input voltage:
10 to 30 VDC( PD65 “L” series)
20 to 60 VDC( PD65 “M” series)
30 to 90 VDC( PD65 “H” series)
Operating temperature:
Storage temperature:
Relative humidity:
Derating:
0℃ to +70℃
-40℃ to +85℃
5﹪ to 95﹪ non-condensing
Derate from 100﹪ at +50℃
linearly to 50﹪ at +70℃
Input current:
4.1A( rms) for 24 VDC
2.1A( rms) for 48 VDC
1.5A( rms) for 72 VDC
OUTPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Output voltage/current:
Total output power:
Ripple and noise:
See rating chart
Switching frequency:
32KHz ±5KHz
65 watts maximum
Efficiency:
70﹪minimum at full load
±0.5﹪maximum at full load
1000VDC from input to output
1﹪peak to peak max.
Line regulation:
Withstand voltage:
MTBF:
Overvoltage protection:
set at 112 - 132﹪of its nominal
output voltage
400,000 hours minimum at full load
at 25℃ambient, calculated per
MIL-HDBK-217F
Overcurrent protection:
All outputs protected to short
circuit conditions
Temperature coefficient:
Transient response:
All outputs ±0.04﹪/℃
maximum
Maximum excursion of 4﹪or
better on all models, recovering
to 1﹪of final value within
500us after a 25﹪step load
change
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com