MECHATRONIC DRIVES WITH STEPPER MOTOR
PANdrives
PD-116-60-SE
60mm / NEMA24
Stepper Motor with
Controller / Driver,
with Encoder and
Serial Interface
10 mm
MAIN CHARACTERISTICS
INFO The PD-116-60-SE is a full mechatronic solution including a 60
mm flange motor (NEMA24). It combines a convenient controller
electronic and a sensOstep™ encoder with a range of different
motor types. The PD-116-60-SE offers four motor torque options
and can be controlled via RS-232 or CAN interface. Power supply,
RS232 interface and multi purpose I/Os can be connected via a
15-pin D-Sub connector and CAN via a 9-pin D-Sub connector.
The chopSync™ feature allows high speed movement avoiding
resonances. The PD-116-60-SE comes with the PC based software
development environment TMCL-IDE for the Trinamic Motion
Control Language (TMCL). Using predefined TMCL high level
commands like „move to position“ or „constant rotation“ a rapid
and fast development of motion control applications is guar-
anteed. Communication traffic is kept very low since all time
critical operations, e.g. ramp calculation are performed onboard.
The TMCL program can be stored in the on-board EEPROM for
stand-alone operation. An optional firmware allows to control
the PD-116-60-SE via CANopen. The firmware of the module can
be updated via the serial interface.
ELECTRICAL • nom. 24V DC supply voltage (28.5V max.)
DATA
• up to 2.8A RMS coil current
MOTOR DATA • holding torque 1.10 / 1.65 / 2.10 / 3.10 Nm
• please also refer to the motor datasheet
INTERFACE • CAN 2.0b (up-to 1Mbit/s) and RS232 interface
• five 24V compatible inputs (stop- and home-
switch) and 3 open-collector outputs
FEATURES • sensOstep™ encoder (max. 4096 incr./rot.)
• chopSync™ for high velocity operation
• stallGuard™ for motor stall detection
• up to 64 times microstepping
• memory for 2048 TMCL commands
• rotary switches to adjust CAN-ID
• motion profile calculation in real-time
• on the fly alteration of motion parameters
• dynamic current control
• integrated protection
• TRINAMIC driver technology:
low power dissipation, no heatsink required
SOFTWARE • stand-alone operation using TMCL
or remote controlled operation
TMCL
Memory
PD-116-60-SE
• PC-based application development
software TMCL-IDE included
CAN
programmable
Step
MOSFET
Driver
Stage
high power
Driver
Motion
Controller
with TMC428
RS232
Address
• optional CANopen firmware (CiA 301, 402)
OTHER • 15-pin D-Sub connector (male)
• 9-pin D-Sub connector (male)
TMC249
Motor
Selector
sensOstep™
Encoder
24V
5V Power Supply
• RoHS compliant
ORDER CODE
DESCRIPTION
PD1-116-60-SE (-option)
PD2-116-60-SE (-option)
PD3-116-60-SE (-option)
PANdrive 1.10 Nm, 77 mm length with motor QSH6018-45-28-110
PANdrive 1.65 Nm, 88 mm length with motor QSH6018-56-28-165
PANdrive 2.10 Nm, 97 mm length with motor QSH6018-65-28-210
PANdrive 3.10 Nm, 118 mm length with motor QSH6018-86-28-310
PD4-116-60-SE (-option)
OPTIONS
TMCL
with TMCL firmware
CANopen
with CANopen firmware
www.trinamic.com – for detailed information and datasheets
86
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
