Model PD0922J7575D2
Rev D
Ultra Low Profile 0805 Power Divider
75Ω to 75Ω
Description
The PD0922J7575D2 is a low profile, sub-miniature Wilkinson power divider in an
easy to use surface mount package and is ideal for high volume manufacturing
while delivering higher performances than traditional printed and lumped element
solutions. It has been designed for the following markets: DVB-S, GSM, DCS, PCS,
WCDMA, GPS, 802.11a+g, Bluetooth, and Zigbee USA.
The PD0922J7575D2 is matched to 75Ω and has a height profile of 0.8 mm. A two
section Wilkinson design results in increased isolation performance. Two external
resistors are required for operation. Components are available on tape and reel for
high volume manufacturing pick and place.
All Xinger components are constructed from ceramic filled PTFE composites which
possess excellent electrical and mechanical stability having X and Y thermal
coefficient of expansion (CTE) of 17 ppm/oC.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
Ω
• 950 – 2150 MHz
Frequency
950
2150
• 16 dB Isolation (output ports)
• Good Return Loss
• 0.8mm Height Profile
• 75ꢀ Outputs/Inputs
• External resistors required
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
Input Port Impedance
Output Port Impedance
Return Loss
75
75
11
0.8
0.4
2
Ω
9.5
dB
Insertion Loss*
1.0
0.7
3
dB
Amplitude Balance
Phase Balance
dB
Degrees
dB
Isolation (Output Ports)
Power Handling
Operating Temperature
14
16
• Non-conductive Surface
• RoHS Compliant
2
Watts
ºC
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
.079±.004
[2.00±0.10]
4X .026
[0.65]
.021±.002
[0.53±0.05]
1
2
3
4
.039
[0.98]
6X .009
[0.22]
.049±.004
[1.25±0.10]
Orientation
Marker Denotes
Pin Location
Orientation
Marker Denotes
Pin Location
6
5
6X .012
[0.30]
Pin Designation
1
2
3
4
5
6
Output 1
Input
Mid 2
Mid 1
GND
Dimensions are in Inches [Millimeters]
Mechanical Outline
Tolerances are Non-Cumulative
Output 2
USA/Canada:
Toll Free:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape
and Reel for Pick and
Place Manufacturing.
Europe: