Model PD0922J5050S2HF
Rev D
Ultra Low Profile 0805 Power Divider Ultra Low
50Ω to 50Ω
Description:
The PD0922J5050S2HF is a low profile, sub-miniature Wilkinson
power divider in an easy to use surface mount package. The
PD0922J5050S2HF is ideal for high volume manufacturing and
delivers higher performances than traditional printed and lumped
element solutions. The PD0922J5050S2HF is matched to 50 Ω and
has a height profile of 0.5 mm which is ideal for high level integrations
in the following markets: DVB-S, DVB-H (USA), GSM, DCS, PCS,
CDMA, 3G and GPS. The PD0922J5050S2HF does not include the
resistive element and therefore, requires an external resistor for
operation. The PD0922J5050S2HF is available on tape and reel for
high volume manufacturing pick and place
Detailed Electrical Specifications:
Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
Ω
• 950-2150 MHz
Frequency
950
2150
• 10dB Isolation (output ports)
• High Return Loss
• 0.5mm Height Profile
• 50Ω Input / 50Ω Outputs
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• External resistor required
Input Port Impedance
Output Port Impedance
Return Loss
50
50
12
0.5
0.1
1
Ω
10.4
dB
Insertion Loss*
Amplitude Balance
Phase Balance
0.8
0.3
3
dB
dB
Degrees
dB
Isolation (Output Ports)
Power Handling@85oC
@105oC
9
10
2
1.2
Watts
• Halogen Free
Operating Temperature
-55
+140
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing
Outline Drawing:
TOP VIEW (Near Side)
2.04±0.10
SIDE VIEW
BOTTOM VIEW (Far Side)
4x 0.37
0.54±0.05
3
1
2
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
5
4
6
6x
0.30
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
4x 0.65
Pin Designation
1
2
3
4
5
6
GND
Input
GND
Mechanical Outline
-Dimensions are in Millimeters
Output 1
GND
Output 2
1