Model PD0409J7575S2HF
Rev B
Ultra Low Profile 0805 Power Divider
75Ω to 75Ω
Description:
The PD0409J7575S2HF is a low profile, sub-miniature Wilkinson
power divider in an easy to use surface mount package. The
PD0409J7575S2HF is ideal for high volume manufacturing and
delivers higher performances than traditional printed and lumped
element solutions. The PD0409J7575S2HF is matched to 75 Ω and
has a height profile of 0.5 mm which is ideal for high level integrations
in the following markets: GSM, WCDMA, DVB-H (Europe) and
Terrestrial TV. The PD0409J7575S2HF does not include the
resistive element and therefore, requires an external resistor for
operation. The PD0409J7575S2HF is available on tape and reel for
high volume manufacturing pick and place.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
Ω
• 400-900 MHz
Frequency
400
900
• 9.3 dB Isolation (output ports)
• Good Return Loss
• 0.5mm Height Profile
• 75Ω Input / 75Ω Outputs
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• External Resistor Required
• Halogen Free
Input Port Impedance
Output Port Impedance
Return Loss
75
75
12
0.5
0.1
1
Ω
10
dB
Insertion Loss*
0.6
0.6
3
dB
Amplitude Balance
Phase Balance
Isolation (Output Ports)
Power Handling
dB
Degrees
dB
8.2
-55
9.3
2
Watts
Operating Temperature
+85
ºC
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing:
TOP VIEW (Near Side)
SIDE VIEW
BOTTOM VIEW (Far Side)
4x 0.37
1
2
0.54±0.05
3
2.04±0.10
2x 0.15
1.29±0.10
6x 0.98
6x
0.22
5
4
6
6x
0.30
Orientation Marker
Denotes Pin Location
Orientation Marker
Denotes Pin Location
4x 0.65
Pin Designation
1
2
3
4
5
6
GND
Input
GND
Output 1
GND
Mechanical Outline
-Dimensions are in Millimeters
Output 2
1