General Purpose Relays
SCHRACK
Slimline PCB Relay PCN
n
n
n
n
n
n
n
n
1 pole 3 A, 1 NO contact
Only 5 mm wide
3 A switching current; 5 A version available
Load range 1 mA up to 3 A
Sensitive coil 120 mW
Allows high function- / packing density
Cadmium-free contacts
Z type with reinforced insulation
Applications
F0258-B
Centralized and decentralized heating control, extremely narrow interface
elements, interface technology, timers, PLC's, I/O modules, I/O-ports
Approvals
V
REG.-Nr. 6166;
Z
E82292
Technical data of approved types on request
Contact data
Contact configuration
1NO
bifurcated contact
micro disconnection
250/277 VAC
3 A
Contact set
Type of interruption
Rated voltage / max. switching voltage AC
Rated current
Limiting continuous current
Maximum breaking capacity AC
Limiting making capacity, max 4 s, duty factor 10%
Contact material
3 A
750 VA
5 A
AgNi90/10
5V / 1mA
Minimum contact load
Rated frequency of operation with / without load
Operate- / release time
10 / 600 min-1
max. 8/3 ms
max. 2/2 ms
Bounce time NO / NC contact
Contact ratings
Type
Contact Load
Ambient
Cycles
temp. [°C]
IEC 61810
PCN-1..D3MHZ
NO
3 A, 250 VAC, cosϕ=1
5 A, 250 VAC, cosϕ=1
70°C
85°C
100x103
30x103
PCN-1..D3MHZ-001 NO
UL 508
PCN-1..D3MHZ
PCN-1..D3MHZ
PCN-1..D3MHZ
PCN-1..D3MHZ
NO
NO
NO
NO
3 A, 250 VAC, resistive
Pilot duty, B300
25°C
25°C
25°C
100x103
6x103
Pilot duty, R300
6x103
9 A LRA, 1,5A FLA, 240 VAC
45°C
30x103
Coil data
Rated coil voltage range DC coil
Operative range to IEC 61810
5...24 VDC
1
Coil versions, DC-coil
Coil
Rated
Operate
Release
voltage
VDC
0.5
Coil
resistance
Ohm
208+10%
300+10%
675+10%
1200+10%
4800+10%
Rated coil
power
mW
code
voltage
voltage
VDC
3.5
VDC
5
005
006
009
012
024
120
6
4.2
0.6
120
9
6.3
0.9
120
12
24
8.4
1.2
120
16.8
2.4
120
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
1
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
processing information only
to be used together with the
'Definitions' section in the cat-
alogue or at schrackrelays.com
in the ‘Schrack’ section.
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
Specifications subject to
change.