ꢀ ꢁꢂ ꢃ ꢄꢅ ꢄ
SBAS290B − JULY 2003 − SEPTEMBER 2004
High-Performance 24-Bit, 216kHz Sampling
Stereo Audio Analog-to-Digital Converter
FEATURES
APPLICATIONS
D
Two High-Performance Delta-Sigma
D
D
D
D
D
Digital Recorders and Mixing Desks
Digital Audio Effects Processors
Broadcast Studio Equipment
Surround-Sound Encoders
High-End A/V Receivers
Analog-to-Digital Converters
− 24-Bit Linear PCM or 1-Bit Direct Stream
Digital (DSD) Output Data
− Supports PCM Output Sampling Rates up
to 216kHz
− Supports 64f and 128f DSD Output Data
S
S
DESCRIPTION
Rates
D
Dynamic Performance: PCM Output
The PCM4202 is a high-performance, stereo audio
analog-to-digital (A/D) converter designed for professional
and broadcast audio applications. The PCM4202
architecture utilizes a 1-bit delta-sigma modulator per
channel, incorporating a novel density modulated dither
scheme for improved dynamic performance.
− Dynamic Range (V = −60dBFS,
IN
f
= 1kHz, A-Weighted): 118dB
IN
− THD+N (V = −0.5dB, f = 1kHz): −105dB
IN
IN
D
D
Dynamic Performance: DSD Output, 64f
− Dynamic Range (A-Weighted): 115dB
S
− THD+N (V = −0.5dB, f = 1kHz): −102dB
IN
IN
The PCM4202 supports 24-bit linear PCM output data,
with sampling frequencies up to 216kHz. The PCM4202
can also be configured to output either 64x or 128x
oversampled, 1-bit direct stream digital (DSD) data for
each channel. Support for PCM and DSD output formats
makes the PCM4202 suitable for a variety of digital audio
recording and processing applications.
Audio Serial Port
− 24-Bit Linear PCM Output Data
− Master or Slave Mode Operation
− Supports Left-Justified, Right-Justified,
2
and I SE Data Formats
D
Additional PCM Output Features:
The PCM4202 includes a flexible audio serial port inter-
face, which supports standard audio data formats. Audio
data format selection, sampling mode configuration, and
high-pass filter functions are all programmed using dedi-
cated control pins.
− Linear-Phase Digital Decimation Filter
− Digital High-Pass Filter for DC Removal
− Clipping Flag Output for Each Channel
Power Supplies: +5V Analog and +3.3V Digital
Power Dissipation:
D
D
The PCM4202 operates from a +5V analog power supply
and a +3.3V digital power supply. The digital I/O pins are
compatible with +3.3V logic families. The PCM4202 is
available in a small SSOP-28 package.
− f = 48kHz: 308mW typical
S
− f = 96kHz: 338mW typical
S
− f = 192kHz: 318mW typical
S
D
D
D
Power-Down Mode
Available in a SSOP-28 Package
Pin- and Function-Compatible with the
PCM1804
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
I S is a registered trademark of Royal Philips Electronics B.V., The Netherlands. All other trademarks are the property of their respective owners.
ꢀꢆ ꢇ ꢈꢉ ꢁ ꢊꢋ ꢇꢌ ꢈ ꢍꢊꢍ ꢎꢏ ꢐꢑ ꢒ ꢓꢔ ꢕꢎꢑꢏ ꢎꢖ ꢗꢘ ꢒ ꢒ ꢙꢏꢕ ꢔꢖ ꢑꢐ ꢚꢘꢛ ꢜꢎꢗ ꢔꢕꢎ ꢑꢏ ꢝꢔ ꢕꢙꢞ ꢀꢒ ꢑꢝꢘ ꢗꢕꢖ
ꢗ ꢑꢏ ꢐꢑꢒ ꢓ ꢕꢑ ꢖ ꢚꢙ ꢗ ꢎ ꢐꢎ ꢗ ꢔ ꢕꢎ ꢑꢏꢖ ꢚ ꢙꢒ ꢕꢟꢙ ꢕꢙ ꢒ ꢓꢖ ꢑꢐ ꢊꢙꢠ ꢔꢖ ꢋꢏꢖ ꢕꢒ ꢘꢓ ꢙꢏꢕ ꢖ ꢖꢕ ꢔꢏꢝ ꢔꢒ ꢝ ꢡ ꢔꢒ ꢒ ꢔ ꢏꢕꢢꢞ
ꢀꢒ ꢑ ꢝꢘꢗ ꢕ ꢎꢑ ꢏ ꢚꢒ ꢑ ꢗ ꢙ ꢖ ꢖ ꢎꢏ ꢣ ꢝꢑ ꢙ ꢖ ꢏꢑꢕ ꢏꢙ ꢗꢙ ꢖꢖ ꢔꢒ ꢎꢜ ꢢ ꢎꢏꢗ ꢜꢘꢝ ꢙ ꢕꢙ ꢖꢕꢎ ꢏꢣ ꢑꢐ ꢔꢜ ꢜ ꢚꢔ ꢒ ꢔꢓ ꢙꢕꢙ ꢒ ꢖꢞ
Copyright 2003−2004, Texas Instruments Incorporated
www.ti.com