ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
SBAS342B − DECEMBER 2004 − REVISED APRIL 2006
Low Power, 24-Bit, Single Channel Audio
Analog-to-Digital Converter
FEATURES
APPLICATIONS
D
High Performance Delta-Sigma
Analog-to-Digital Converter
Differential Voltage Inputs
Dynamic Performance:
− Dynamic Range (A-Weighted): Up to
112dB
D
Digital Wireless Microphones
Battery-Powered Audio Recording and
Processing Equipment
D
D
D
DESCRIPTION
The PCM4201 is designed for digital audio applications
that require a combination of high dynamic range, low
distortion, and low power consumption. The primary
applications for the PCM4201 include digital wireless
microphones and battery-operated audio recording or
processing equipment. The PCM4201 outputs 24-bit
linear PCM audio data at sampling rates up to 108kHz.
Three sampling modes allow the user to trade off power for
performance, dependent upon the intended system
requirements. An on-chip voltage reference reduces the
number of external components needed for operation.
− THD+N: As low as −105dB
Three Sampling Modes:
− Supports Output Sampling Rates Up to
108kHz
D
D
− Choose from Low Power, High
Performance, or Double Speed Modes
Audio Serial Port Interface:
− Master or Slave Mode Operation
− 24-Bit Linear PCM Output Data
− Left-Justified/DSP-Compatible Data
Format
Digital High-Pass Filter for DC Removal:
− Includes a High-Pass Filter Disable Pin
Power Supplies:
The PCM4201 includes dedicated control pins for
configuration of all programmable functions. The device
requires a +5.0V analog power supply, in addition to a
digital supply operating from +1.8V to +3.3V. The
PCM4201 is available in a small TSSOP-16 package.
D
D
− Requires a +5V Analog Power Supply
− Supports a +1.8V to +3.3V Digital Power
Supply Range
D
Low Power Dissipation
− 49mW Typical (Low Power Mode with
V
= +3.3V)
DD
− 39mW Typical (Low Power Mode with
= +1.8V)
V
DD
D
D
Power Down Mode
− Less than 50µW total power dissipation
Available in a small TSSOP-16 Package
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
I S is a registered trademark of Royal Philips Electronics B.V., The Netherlands. All other trademarks are the property of their respective owners.
ꢀꢇ ꢈ ꢉꢊ ꢁ ꢋꢌ ꢈꢍ ꢉ ꢎꢋꢎ ꢏꢐ ꢑꢒ ꢓ ꢔꢕ ꢖꢏꢒꢐ ꢏꢗ ꢘꢙ ꢓ ꢓ ꢚꢐꢖ ꢕꢗ ꢒꢑ ꢛꢙꢜ ꢝꢏꢘ ꢕꢖꢏ ꢒꢐ ꢞꢕ ꢖꢚꢟ ꢀꢓ ꢒꢞꢙ ꢘꢖꢗ
ꢘ ꢒꢐ ꢑꢒꢓ ꢔ ꢖꢒ ꢗ ꢛꢚ ꢘ ꢏ ꢑꢏ ꢘ ꢕ ꢖꢏ ꢒꢐꢗ ꢛ ꢚꢓ ꢖꢠꢚ ꢖꢚ ꢓ ꢔꢗ ꢒꢑ ꢋꢚꢡ ꢕꢗ ꢌꢐꢗ ꢖꢓ ꢙꢔ ꢚꢐꢖ ꢗ ꢗꢖ ꢕꢐꢞ ꢕꢓ ꢞ ꢢ ꢕꢓ ꢓ ꢕ ꢐꢖꢣꢟ
ꢀꢓ ꢒ ꢞꢙꢘ ꢖ ꢏꢒ ꢐ ꢛꢓ ꢒ ꢘ ꢚ ꢗ ꢗ ꢏꢐ ꢤ ꢞꢒ ꢚ ꢗ ꢐꢒꢖ ꢐꢚ ꢘꢚ ꢗꢗ ꢕꢓ ꢏꢝ ꢣ ꢏꢐꢘ ꢝꢙꢞ ꢚ ꢖꢚ ꢗꢖꢏ ꢐꢤ ꢒꢑ ꢕꢝ ꢝ ꢛꢕ ꢓ ꢕꢔ ꢚꢖꢚ ꢓ ꢗꢟ
Copyright 2004−2006, Texas Instruments Incorporated
www.ti.com