B
u
r
r
Ć
B
r
o
w
n
P
r
o
d
u
c
t
s
PCM3002
PCM3003
f
r
o
m
T
e
x
a
s
I
n
s
t
r
u
m
e
n
t
s
SBAS079A–OCTOBER 2000–REVISED OCTOBER 2004
16/20-BIT SINGLE-ENDED ANALOG INPUT/OUTPUT STEREO AUDIO CODECS
FEATURES
•
•
Single 3-V Power Supply
Small Package: SSOP-24
•
•
•
•
•
Monolithic 20-Bit ∆Σ ADC and DAC
16/20-Bit Input/Output Data
Software Control: PCM3002
Hardware Control: PCM3003
Stereo ADC:
APPLICATIONS
•
•
•
DVC Applications
DSC Applications
Portable/Mobile Audio Applications
– Single-Ended Voltage Input
– Antialiasing Filter
DESCRIPTION
– 64× Oversampling
The PCM3002 and PCM3003 are low-cost,
single-chip stereo audio codecs (analog-to-digital and
digital-to-analog converters) with single-ended analog
voltage input and output.
– High Performance
• THD+N: –86 dB
• SNR: 90 dB
The ADCs and DACs employ delta-sigma modulation
with 64-times oversampling. The ADCs include a
digital decimation filter, and the DACs include an
8-times oversampling digital interpolation filter. The
DACs also include digital attenuation, de-emphasis,
infinite zero detection, and soft mute to form a
complete subsystem. The PCM3002 and PCM3003
operate with left-justified (ADC) and right-justified
(DAC) formats, while the PCM3002 also supports
other formats, including the I2S data format.
• Dynamic Range: 90 dB
Stereo DAC:
•
– Single-Ended Voltage Output
– Analog Low-Pass Filter
– 64× Oversampling
– High Performance
• THD+N: –86 dB
• SNR: 94 dB
The PCM3002 and PCM3003 provide a power-down
mode that operates on the ADCs and DACs indepen-
dently.
• Dynamic Range: 94 dB
Special Features (PCM3002, PCM3003)
•
•
– Digital De-Emphasis: 32 kHz, 44.1 kHz,
48 kHz
The PCM3002 and PCM3003 are fabricated using a
highly advanced CMOS process, and are available in
– Power Down: ADC/DAC Independent
Special Features (PCM3002)
– Digital Attenuation (256 Steps)
– Soft Mute
a
24-pin SSOP package. The PCM3002 and
PCM3003 are suitable for wide variety of
a
cost-sensitive consumer applications where good per-
formance is required.
The PCM3002 programmable functions are controlled
by software. The PCM3003 functions, which are
controlled by hardware, include de-emphasis,
power-down, and audio data format selections.
– Digital Loopback
– Four Alternative Audio Data Formats
Sampling Rate: 4 kHz to 48 kHz
•
Digital
Decimation
Filter
Lch In
Digital Out
Digital In
Delta-Sigma
Analog Front-End
Modulator
Rch In
Serial Interface
and
*
Mode Control
Low-Pass Filter
and
Output Buffer
Multilevel
Delta-Sigma
Modulator
Digital
Interpolation
Filter
Lch Out
Rch Out
Mode Control
System Clock
* PCM3002 Only
B0006-01
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
System Two, Audio Precision are trademarks of Audio Precision, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2004, Texas Instruments Incorporated