5秒后页面跳转
PCM12XA0 PDF预览

PCM12XA0

更新时间: 2024-10-27 23:26:51
品牌 Logo 应用领域
其他 - ETC /
页数 文件大小 规格书
12页 214K
描述
PROCESSOR MODULE

PCM12XA0 数据手册

 浏览型号PCM12XA0的Datasheet PDF文件第2页浏览型号PCM12XA0的Datasheet PDF文件第3页浏览型号PCM12XA0的Datasheet PDF文件第4页浏览型号PCM12XA0的Datasheet PDF文件第5页浏览型号PCM12XA0的Datasheet PDF文件第6页浏览型号PCM12XA0的Datasheet PDF文件第7页 
M
MPLAB® ICE  
Processor Module and Device Adapter Specification  
CONTENTS  
2.0  
TERMINOLOGY  
1.0 INTRODUCTION ................................................ 1  
2.0 TERMINOLOGY ................................................. 1  
3.0 PROCESSOR MODULES.................................. 2  
4.0 EMULATOR-RELATED ISSUES......................... 4  
5.0 DEVICE ADAPTER ISSUES .............................. 5  
A brief overview of the different components of the sys-  
tem is shown in the figure below. Each component is  
discussed in the following subsections.  
FIGURE 2-1: MPLAB ICE EMULATOR  
SYSTEM  
Host to Pod Cable  
Emulator Pod  
1.0  
INTRODUCTION  
Processor Module  
Flexible Circuit  
The Processor Modules for MPLAB ICE are  
interchangeable personality modules that allow  
MPLAB ICE to be reconfigured for emulation of differ-  
ent PICmicro® microcontrollers (MCUs). This modular-  
ity allows the emulation of many different devices by  
the addition of just a Processor Module and Device  
Adapter, which makes for a very cost effective multipro-  
cessor emulation system.  
Cable  
Logic Probe  
Connector  
Device  
Adapter  
Transition  
Socket  
The Device Adapters for MPLAB ICE are interchange-  
able assemblies that allow the emulator system to  
interface to a target application system. Device Adapt-  
ers also have control logic that allows the target appli-  
cation to provide a clock source and power to the  
Processor Module. The Device Adapters support PIC-  
micro MCUs in DIP, SDIP, and PLCC packages.  
2.1  
Host to Pod Cable  
This is a standard parallel interface cable. MPLAB ICE  
is tested with a 6-foot cable. A longer cable may work,  
but is not guaranteed. The cable connects to a parallel  
port on the PC. If a PC has a printer connected to an  
LPT device, it is recommended that an additional inter-  
face card be installed, rather than using a splitter or an  
A/B switch.  
Transition Sockets, used along with a Device Adapter,  
provide a method of accommodating all PICmicro MCU  
packages, including SOIC, SSOP, PQFP, and TQFP  
packages.  
2.2  
Emulator Pod  
The Emulator Pod contains emulator memory and con-  
trol logic. MPLAB ICE 2000 contains a main board and  
an additional board for expanded trace memory and  
complex control logic. There are no field serviceable  
parts in the pod. For more information on the pod, see  
the MPLAB ICE User’s Guide (DS51159).  
The MPLAB ICE Processor Module is inserted into the  
pod for operation.  
2.3  
Processor Module  
The Processor Module contains the emulator chip,  
logic and low-voltage circuitry. There are no field ser-  
viceable parts mounted on the printed circuit board  
housed within the Processor Module enclosure.  
MPLAB is a registered trademark of Microchip Technology Inc.  
PICMASTER is a registered trademark of Microchip Technology Inc.  
2001 Microchip Technology Inc.  
DS51140D-page 1  

与PCM12XA0相关器件

型号 品牌 获取价格 描述 数据表
PCM13SMTBR LITTELFUSE

获取价格

Ultraminiature Surface Mount Slide Switch
PCM13SMTR ITT

获取价格

Ultraminiature Surface Mount Slide Switches
PCM13SMTR CK-COMPONENTS

获取价格

Ultraminiature Surface Mount Slide Switches
PCM13SMTR LITTELFUSE

获取价格

Ultraminiature Surface Mount Slide Switch
PCM14XA0 ETC

获取价格

PROCESSOR MODULE
PCM-150-174 PANDUIT

获取价格

CARD MARKER WIRE SOLID
PCM1600 BB

获取价格

24-Bit, 96kHz Sampling, 6-Channel, Enhanced Multi-Level, Delta-Sigma DIGITAL-TO-ANALOG CON
PCM1600 TI

获取价格

DIGITAL-TO-ANALOG CONVERTER
PCM1600Y BB

获取价格

24-Bit, 96kHz Sampling, 6-Channel, Enhanced Multi-Level, Delta-Sigma DIGITAL-TO-ANALOG CON
PCM1600Y TI

获取价格

SERIAL INPUT LOADING, 24-BIT DAC, PQFP48, LQFP-48