5秒后页面跳转
PCA9704PW PDF预览

PCA9704PW

更新时间: 2024-11-15 15:18:51
品牌 Logo 应用领域
恩智浦 - NXP /
页数 文件大小 规格书
26页 504K
描述
18 V tolerant SPI 8-bit GPI with maskable INT - AEC_Q100 compliant

PCA9704PW 技术参数

生命周期:ActiveReach Compliance Code:unknown
HTS代码:8542.39.00.01风险等级:5.65
接口集成电路类型:INTERFACE CIRCUITBase Number Matches:1

PCA9704PW 数据手册

 浏览型号PCA9704PW的Datasheet PDF文件第2页浏览型号PCA9704PW的Datasheet PDF文件第3页浏览型号PCA9704PW的Datasheet PDF文件第4页浏览型号PCA9704PW的Datasheet PDF文件第5页浏览型号PCA9704PW的Datasheet PDF文件第6页浏览型号PCA9704PW的Datasheet PDF文件第7页 
PCA9704  
18 V tolerant SPI 8-bit GPI with maskable INT  
Rev. 1 — 10 December 2015  
Product data sheet  
1. General description  
The PCA9704 is a low power 18 V tolerant SPI General Purpose Input (GPI) shift register  
designed to monitor the status of switch inputs. It generates an interrupt when one or  
more of the switch inputs change state but allows selected inputs to not generate  
interrupts using the interrupt masking feature. The input level is recognized as a HIGH  
when it is greater than 0.8 VDD and as a LOW when it is less than 0.55 VDD (minimum  
LOW threshold of 2.5 V at 5 V node). The PCA9704 can monitor up to 8 switch inputs.  
The falling edge of the CS pin samples the input port status and clears the interrupt. When  
CS is LOW, the rising edge of the SCLK loads the shift register and shifts the value out of  
the shift register. The serial input is sampled on the falling edge of SCLK. The contents of  
the shift register are loaded into the interrupt mask register of the device on the rising  
edge of CS.  
Each of the input ports has a 18 V breakdown ESD protection circuit, which dumps the  
ESD/overvoltage current to ground. When used with a series resistor (minimum 100 k),  
the input can connect to a 12 V battery and support double battery, reverse battery, 27 V  
jump start and 40 V load dump conditions in automotive applications. Higher voltages can  
be tolerated on the inputs depending on the series resistor used to limit the input current.  
The INT_EN pin is used to both enable the GPI pins and to enable the INT output pin to  
minimize battery drain in cyclically supplied pull-up or pull-down applications. The SDIN  
pull-down prevents floating nodes when the device is used in daisy-chain applications.  
With both the high breakdown voltage and high ESD, this device is useful for both  
automotive (AEC-Q100 compliance available) and mobile applications.  
2. Features and benefits  
8 general purpose input ports  
18 V tolerant input ports with 100 kexternal series resistor  
Input LOW threshold 0.55 VDD with minimum of 2.5 V at VDD = 4.5 V  
Open-drain interrupt output  
Interrupt enable pin (INT_EN) disables GPI pins and interrupt output  
Interrupt-masking feature allows no interrupt generation from selected inputs  
VDD range: 4.5 V to 5.5 V  
IDD is very low 2.5 A maximum  
SPI serial interface with speeds up to 5 MHz  
SPI supports daisy-chain connection for large switch numbers  
AEC-Q100 compliance available  

与PCA9704PW相关器件

型号 品牌 获取价格 描述 数据表
PCA9704PWJ NXP

获取价格

PCA9704 - 18 V tolerant SPI 8-bit GPI with maskable INT TSSOP 16-Pin
PCA9745B NXP

获取价格

16-channel SPI serial bus 57 mA/20 V constant current LED driver
PCA9745BTW NXP

获取价格

16-channel SPI serial bus 57 mA/20 V constant current LED driver
PCA9745BTWJ NXP

获取价格

PCA9745B - 16-channel SPI serial bus 57 mA/20 V constant current LED driver TSSOP2 28-Pin
PCA9745BTWQ900 NXP

获取价格

16-channel SPI serial bus 57 mA/20 V constant current LED driver
PCA9846BS NXP

获取价格

4-channel ultra-low voltage, Fm I2C-bus switch with reset
PCA9846PW NXP

获取价格

4-channel ultra-low voltage, Fm I2C-bus switch with reset
PCA9846PWJ NXP

获取价格

4-channel ultra-low voltage, Fm I2C-bus switch with reset
PCA9847PW NXP

获取价格

8-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset
PCA9848BS NXP

获取价格

8-channel ultra-low voltage, Fm I2C-bus switch with reset