5秒后页面跳转
PCA9617ATP PDF预览

PCA9617ATP

更新时间: 2024-09-24 12:29:51
品牌 Logo 应用领域
恩智浦 - NXP 中继器
页数 文件大小 规格书
24页 1110K
描述
Level translating Fm I2C-bus repeater

PCA9617ATP 数据手册

 浏览型号PCA9617ATP的Datasheet PDF文件第2页浏览型号PCA9617ATP的Datasheet PDF文件第3页浏览型号PCA9617ATP的Datasheet PDF文件第4页浏览型号PCA9617ATP的Datasheet PDF文件第5页浏览型号PCA9617ATP的Datasheet PDF文件第6页浏览型号PCA9617ATP的Datasheet PDF文件第7页 
PCA9617A  
Level translating Fm+ I2C-bus repeater  
Rev. 1 — 20 March 2013  
Product data sheet  
1. General description  
The PCA9617A is a CMOS integrated circuit that provides level shifting between low  
voltage (0.8 V to 5.5 V) and higher voltage (2.2 V to 5.5 V) Fast-mode Plus (Fm+) I2C-bus  
or SMBus applications. While retaining all the operating modes and features of the  
I2C-bus system during the level shifts, it also permits extension of the I2C-bus by providing  
bidirectional buffering for both the data (SDA) and the clock (SCL) lines, thus enabling two  
buses of 540 pF at 1 MHz or up to 4000 pF at lower speeds. Using the PCA9617A  
enables the system designer to isolate two halves of a bus for both voltage and  
capacitance. The SDA and SCL pins are overvoltage tolerant and are high-impedance  
when the PCA9617A is unpowered.  
The 2.2 V to 5.5 V bus port B drivers have the static level offset, while the adjustable  
voltage bus port A drivers eliminate the static offset voltage. This results in a LOW on the  
port B translating into a nearly 0 V LOW on the port A which accommodates the smaller  
voltage swings of lower voltage logic.  
The static offset design of the port B PCA9617A I/O drivers prevents them from being  
connected to the static or incremented offset of other bus buffers. Port A of two or more  
PCA9617As can be connected together, however, to allow a star topography with port A  
on the common bus, and port A can be connected directly to any other buffer with static or  
incremented offset outputs. Multiple PCA9617As can be connected in series, port A to  
port B, with no build-up in offset voltage with only time of flight delays to consider.  
The PCA9617A drivers are not enabled unless VCC(A) is above 0.8 V and VCC(B) is above  
2.2 V. The EN pin is referenced to VCC(B) and can also be used to turn the drivers on and  
off under system control. Caution should be observed to only change the state of the  
enable pin when the bus is idle.  
The output pull-down on the port B internal buffer LOW is set for approximately 0.55 V,  
while the input threshold of the internal buffer is set about 90 mV lower (0.45 V). When the  
port B I/O is driven LOW internally, the LOW is not recognized as a LOW by the input.  
This prevents a latching condition from occurring. The output pull-down on port A drives a  
hard LOW and the input level is set at 0.35VCC(A) to accommodate the need for a lower  
LOW level in systems where the low voltage side supply voltage is as low as 0.8 V.  
2. Features and benefits  
2 channel, bidirectional buffer isolates capacitance and allows 540 pF on either side of  
the device at 1 MHz and up to 4000 pF at lower speeds  
Voltage level translation from 0.8 V to 5.5 V and from 2.2 V to 5.5 V  
Footprint and functional replacement for PCA9517A at Fast-mode speeds  
Port A operating supply voltage range of 0.8 V to 5.5 V with normal levels  
 
 

与PCA9617ATP相关器件

型号 品牌 获取价格 描述 数据表
PCA9617ATPZ NXP

获取价格

Level translating Fm+ I²C-bus repeater SON 8-
PCA9618UK NXP

获取价格

SPECIALTY INTERFACE CIRCUIT
PCA9618UKZ NXP

获取价格

PCA9618 - Single channel Fm+ I²C-bus repeater
PCA9620 NXP

获取价格

Universal LCD driver for low multiplex rates
PCA9620_11 NXP

获取价格

60 x 8 LCD high-drive segment driver for automotive and industrial
PCA9620H NXP

获取价格

Universal LCD driver for low multiplex rates
PCA9620H/1,518 NXP

获取价格

PCA9620 - 60 x 8 LCD high-drive segment driver for automotive and industrial QFP 80-Pin
PCA9620HQ900 NXP

获取价格

60 x 8 LCD high-drive segment driver for automotive and industrial
PCA9620HQ9001 NXP

获取价格

60 x 8 LCD high-drive segment driver for automotive and industrial
PCA9620U NXP

获取价格

60 x 8 LCD high-drive segment driver for automotive and industrial