Datasheet > 驱动程序和接口 > 线路驱动器或接收器> PCA9542A

PCA9542A

更新时间： 2024-09-17 05:59:47

品牌	Logo	应用领域
恩智浦 - NXP		复用器
页数	文件大小	规格书
22页	122K
描述
2-channel I2C-bus multiplexer and interrupt logic

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PCA9542A 数据手册

PCA9542A

2-channel I²C-bus multiplexer and interrupt logic

Rev. 04 — 15 June 2009

Product data sheet

1. General description

The PCA9542A is a 1-of-2 bidirectional translating multiplexer, controlled via the I²C-bus.

The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.

Only one SCx/SDx channel is selected at a time, determined by the contents of the

programmable control register. Two interrupt inputs, INT0 and INT1, one for each of the

SCx/SDx downstream pairs, are provided. One interrupt output, INT, which acts as an

AND of the two interrupt inputs, is provided.

A power-on reset function puts the registers in their default state and initializes the I²C-bus

state machine with no channels selected.

The pass gates of the multiplexer are constructed such that the V_DDpin can be used to

limit the maximum high voltage which will be passed by the PCA9542A. This allows the

use of different bus voltages on each SCx/SDx pair, so that 1.8 V, 2.5 V, or 3.3 V parts can

communicate with 5 V parts without any additional protection. External pull-up resistors

pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant.

2. Features

I 1-of-2 bidirectional translating multiplexer

I I²C-bus interface logic; compatible with SMBus

I 2 active LOW interrupt inputs (INT0, INT1)

I Active LOW interrupt output (INT)

I 3 address pins allowing up to 8 devices on the I²C-bus

I Channel selection via I²C-bus

I Powers up with all multiplexer channels deselected

I Low R_onswitches

I Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses

I No glitch on power-up

I Supports hot insertion

I Low standby current

I Operating power supply voltage range of 2.3 V to 5.5 V

I 5 V tolerant inputs

I 0 Hz to 400 kHz clock frequency

I ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per

JESD22-A115 and 1000 V CDM per JESD22-C101

I Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA

I Packages offered: SO14, TSSOP14

12 3 4 5 6 7...22

中文翻译

下载PDF

与PCA9542A相关器件

型号	品牌	获取价格	描述	数据表
PCA9542AD	NXP	获取价格	2-channel I2C-bus multiplexer and interrupt logic
PCA9542AD,112	NXP	获取价格	PCA9542A - 2-channel I2C-bus multiplexer and interrupt logic SOIC 14-Pin
PCA9542APW	NXP	获取价格	2-channel I2C-bus multiplexer and interrupt logic
PCA9542APW,118	NXP	获取价格	PCA9542A - 2-channel I2C-bus multiplexer and interrupt logic TSSOP 14-Pin
PCA9542APW/DG,118	NXP	获取价格	PCA9542A - 2-channel I2C-bus multiplexer and interrupt logic TSSOP 14-Pin
PCA9542APW-T	NXP	获取价格	2-channel I2C multiplexer and interrupt logic - # of Addresses: 8 ; I2C-bus: 400 kHz; Inpu
PCA9542D	NXP	获取价格	IC 9542 SERIES, 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-01
PCA9542D-T	NXP	获取价格	IC 9542 SERIES, 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO14, 3.90 MM, PLASTIC, MS-01
PCA9542PW	NXP	获取价格	2-channel I2C multiplexer and interrupt controller
PCA9542PWDH	NXP	获取价格	2-channel I2C multiplexer and interrupt controller