Precision Resistor Type PBV
Spec Sheet R361-1/2 July 97
Technical Data
Resistance range
Tolerances
0.5 mOhm - 1 Ohm
0.5 %, 1 %, 5 %
Temperature coefficient ( R > 10 mOhm )
Applicable temperature range
Load capacity
< 30 ppm/K ( 20 °C to 60 °C )
-55 °C to +125 °C
3 W / 10 W with heatsink provided
Rth < 3 K/W
Thermal resistance to aluminum base plate
Thermal resistance to ambient
Dielectric withstanding voltage
Inductance ( R = 50 mOhm )
Rth < 15 K/W
500 V AC
< 5 nH
Stability ( nominal load at 70 °C )
deviation < 0.5 % after 2,000 h
Remarks:
- Standard resistance values according to E12 with the additionel values of 2 and 5
- Minimum quantity of other values on request
- Tolerance 0.5% for values from 4,7 mOhm
Thefour-terminalresistortypePBVderivedfromtypePBH spring clamp to a heatsink, whereby the large area of the
is especially designed for the low impedance range, in base plate will provide excellent heat transfer. The low
order to obtain lowest temperature coefficient values, and thermal resistance between resistor foil and aluminum
in order to guarantee the independence of the resistance base plate warrants for a low temperature rise at nominal
value from the soldering quality. The use of the precision loadinthisconfigurationandpermitstransientoverloading
resistance material MANGANIN combined with a highly up to one magnitude.
temperatureresistantandhumidityinsusceptibleDuroplast
cover as well as optimization of layout and lines result in a The resistor is ideally suited for applications in power
highlongtermstability,lowtemperaturecoefficientandlow
inductance.
electronic and control technique, as most applications at
inductiveloadingwillrequireoperationwithswitchedpower
regulating units.
The shape is compatible with the latest power transistors.
The resistor is mounted through a center bore or
Short connection distances and small dimensions at high
load capacity and low inductance are a prerequi-
site to obtain high switching frequencies.
P / P Nenn
1
0.75
0.5
0.25
0
20
40
60
80
100
120
TG / [oC]
power derating curve
∆R/R20 [%]
0.2
-40 -20
20
40
60
80 100 120
T [oC]
-0.2
-0.4
Temperature dependence of the electrical resistance
of ISA-PLAN Resistors
dimensions (mm)