PATT
Vishay Dale Thin Film
www.vishay.com
Precision Automotive High Temperature (155 °C at Full
Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified
FEATURES
• Resistance range: 1.0 Ω to 1 MΩ
• AEC-Q200 qualified, table 7F
• AEC-Q200 qualified, ESD rated class 1C
(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)
• Laser trimmed to any value
• Intrinsic moisture protected resistor element
• Moisture resistant to MIL-STD-202, method 106
• Tantalum nitride resistor film on alumina substrate
• 100 % visual inspected per MIL-PRF-55342
LINKS TO ADDITIONAL RESOURCES
• Laser-trimmed tolerances to 0.1 %
• Load life stability 0.2 % at 1000 h at 155 °C and 100 %
rated power
Infographics
• Very low noise and voltage coefficient
The terminations consist of an adhesion layer, a leach
(< -30 dB, < 0.1 ppm/V)
resistant nickel barrier and gold plating compatible with high
temperature solder systems.
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
CONSTRUCTION
Tantalum Nitride
Resistive Film
TYPICAL PERFORMANCE
Passivation
Gold
ABSOLUTE
Nickel Barrier
TCR
TOL.
25
High Purity
Alumina Substrate
Adhesion Layer
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Tantalum nitride
1.0 Ω to 1 MΩ
25 ppm/°C to 100 ppm/°C
0.1 % to 1.0 %
0.2 %
-
Resistance Range
TCR: Absolute
-
-55 °C to +175 °C
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
+25 °C
1000 h at 155 °C and 100 % rated power
Not applicable
Less than 0.1 ppm/V
75 V
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range (1)
Noise
-
-
-55 °C to +250 °C
-55 °C to +250 °C
< -30 dB
-
-
-
Shelf Life Stability: Absolute
100 ppm
1 year at 25 °C
Note
(1)
Storage temperature rating is for device only
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE (Ω)
1.5 to 51K
0402
50
75
75
0603
150
200
400
2.75 to 120K
0805
100
200
2.75 to 301K
1206
1.0 to 1M
Revision: 08-Mar-2021
Document Number: 60124
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000