VDE
TURQUOISE SWITCHES
ABS TYPE
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
• Subminiature size (19.8×11.1×6.4 mm)
6.4
19.3
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
11.1
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
RoHS compliant
ORDERING INFORMATION
Ex. ABS
1
1
1
0
4
0
3
Operating
force by
pin plunger
(max.)
Wire and
terminal
position
Type of
switch
Contact
arrangement
Terminal
Actuator
Contact*
Agency standard
ABS:
1: Straight type 1: .110 quick-connect 1: SPDT
0: Pin plunger
4: 0.98 N
0: AgNi alloy
1: Au-clad
triple layer
4: Au-clad
double layer
3: UL/CSA/VDE/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
9: UL/CSA
Turquoise 4: Right angle
switch
S type
terminal
2: SPST-NC 1: Short hinge lever 5: 1.47 N
3: SPST-NO 2: Hinge lever
3: Long hinge lever
4: Simulated roller
5: Left angle
4: Solder terminal
5: PC board terminal
6: Wire leads
(Au-clad double layer type)
lever
6: Roller lever
8: Leaf lever
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. Wire leads type with agency standard will be discontinued from August 31, 2012.
5. As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
1: Au-clad triple layer
4: Au-clad double layer
AgNi alloy
Au-clad
CuNi alloy
AgNi alloy
Au-clad
CuNi alloy
AECTB2E 201201-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e