Datasheet > PA5121.231HLT

PA5121.231HLT

更新时间： 2024-11-20 02:52:43

品牌	Logo	应用领域
普思电子 - PULSE		/
页数	文件大小	规格书
6页	725K
描述
SMT Power Inductors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PA5121.231HLT 数据手册

SMT Power Inductors

Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series

POWER PRODUCTS

Current Rating: PA4792 (100Apk), PA4793 (60Apk)

Inductance Range: 200nH to 500nH

Height: 7.25mm Max (PA4792)

6.6mm Max (PA4793)

5.35mm Max (PA5121)

Footprint: 22.2mm x 8.2mm Max (PA4792)

15.1mm x 8.6mm Max (PA4793)

8.3mm x 7.5mm Max (PA5121)

Electrical Speciﬁcations @ 25°C — Operating Temperature -40°C to +130°C⁷

Saturation Current ⁵

Inductance¹

@ 0ADC

Inductance²

@Irated

Irated ³

DCR ⁴

Heating Current⁶

Hi-pot¹⁰

(Vdc)

Part

(A TYP)

Number

(ADC)

(mΩ )

(A TYP)

(nH 10ꢀ%

(nH TYP)

25°C

100

100°C

PA4792.XXXHL: 22.2 x 8.2 x 7.25mm Max

PA4792.231HLT

230

470

0.47 10%

1.15 15%

200

PA4793.XXXHL: 15.1 x 8.6 x 6.6mm Max

PA4793.501HLT

500

PA5121.XXXHL: 8.3 x 7.5 x 5.35mm Max

PA5121.201HLT

PA5121.231HLT

200

230

200

230

0.65 +/-0.15

200

19.5

NOTES:

Inductance measured at 100kHz, 100mVrms.For PA4793 the listed inductance is mea-

sured from 1-3 with pins 2,4 shorted

approximately 40°C when used in a typical application.

7. In high volt*time applications, additional heating in the component can occur due to

core losses in the inductor which may neccessitate derating the current in order to limit

the temperature rise of the component. To determine the approximate total losses (or

temperature rise) for a given application, the coreloss and temperature rise curves can

be used.

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.

3. The rated current as listed is either the saturation current (25°C or 100°C) or the heating

current depending on which value is lower.

4. The nominal DCR is measured from point ① to point ② , as shown below on the

8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry

standard tape and reel specification EIA-481.

mechanical drawing. For PA4793 the listed DCR value is for each winding.

5. The saturation current is the typical current which causes the inductance to drop by 20%

(for PA4792 and PA4793) or 2% (for PA5121) at the stated ambient temperatures (25°C,

100°C ). This current is determined by placing the component in the specified ambient

environment and applying a short duration pulse current (to eliminate self-heating

effects) to the component.

Samples of these parts can be ordered by removing the HLT suffix and replacing with HL.

9. The temperature of the component (ambient plus temperature rise) must be within the

stated operating temperature range.

10. Hi-pot is measured from the bottom of the core to the leads. Hi-pot is tested for

2sec with a leakage current maximum of 0.1mA.

6. The heating current is the DC current which causes the part temperature to increase by

Power.PulseElectronics.com

P853.E (06/20)

12 3 4 5 6

中文翻译

下载PDF

与PA5121.231HLT相关器件

型号	品牌	获取价格	描述	数据表
PA5121.XXXHLT	PULSE	获取价格	SMT Power Inductors
PA51256L-07	INTEL	获取价格	Standard SRAM, 32KX8, 70ns, CMOS, PDSO28, SOP-28
PA51256L-10	INTEL	获取价格	Standard SRAM, 32KX8, 100ns, CMOS, PDSO28, SOP-28
PA51256S-07	INTEL	获取价格	Standard SRAM, 32KX8, 70ns, CMOS, PDSO28, SOP-28
PA51256S-10	INTEL	获取价格	Standard SRAM, 32KX8, 100ns, CMOS, PDSO28, SOP-28
PA512C	E-SWITCH	获取价格	Product Search
PA512J	E-SWITCH	获取价格	Product Search
PA512-SMPA512	TE	获取价格	Cascadable Amplifier
PA5130.001NL	PULSE	获取价格	High Frequency Wire Wound Transformers
PA5130.002NL	PULSE	获取价格	High Frequency Wire Wound Transformers

与PA5121.231HLT相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

22
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

14
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

44
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

43

产品中心

服务支持

精选活动

关于我们

帮助中心

PA5121.231HLT

PA5121.231HLT 数据手册

与PA5121.231HLT相关器件

与PA5121.231HLT相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

PA5121.231HLT

PA5121.231HLT 数据手册

与PA5121.231HLT相关器件

与PA5121.231HLT相关文章

您还可以找

您在本页遇到什么问题？