P6SMB Series
Surface Mount Transient Voltage Suppressors
PINNING
Features
PIN
1
DESCRIPTION
Cathode
• Low profile package
• Glass passivated junction
• Low inductance
Anode
2
• For surface mounted applications in order to
optimize board space
1
2
Mechanical Data
• Case: SMB(DO-214AA)molded plastic
• Epoxy: UL 94V-0 rate flame retardant
• Lead: Lead Formed for surface mount
• Polarity: Color band denotes cathode end except Bipolar
• Mounting Position: Any
Top view
Plastic Package : SMB(DO-214AA)
Description
• Devices for bidirectional applications
• For bidirectional use CA suffix
• Electrical characteristics apply in both directions
Absolute Maximum Ratings (Ta = 25℃ unless otherwise specified)
Parameter
Symbol
PPPM
IPPM
Value
600
Unit
Peak Pulse Power Dissipation with a 10/1000 µs Waveform 1) 2)
W
A
Peak Pulse Current with a 10/1000 µs Waveform 1)
See Table 1
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load (JEDEC Method)
IFSM
(UNI)
100
A
3)
Air
Contact
± 30
± 30
ESD per IEC 61000-4-2
VESD
KV
Maximum Instantaneous Forward Voltage at 50 A 4)
Typical Junction Capacitance at VR = 4 V, f = 1 MHz
Typical Thermal Resistance Junction to Ambient 2)
Operating Junction and Storage Temperature Range
VF
Cj
3.5 / 5
390
V
pF
RθJA
Tj, Tstg
100
℃/W
℃
- 65 to + 150
1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2.
2) Mounted on 5 mm2 (0.13mm thick) land areas.
3) Measured on 8.3ms,single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
4) VF: 3.5 V Max. for types P6SMB6.8A~P6SMB91A, VF: 5 V Max. for types P6SMB100A~P6SMB440A per 1/2 square or equivalent sine
wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
1 / 4
®
Dated : 29/06/2022 JD Rev: 06