P6LG-xxxxEK
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
PMM4-SERIES
ꢀ 1 Watt
ꢀ Regulated
Rev.04-2015
ꢀ Short Circuit Protection
ꢀ Single Output
ꢀ SIP7 Case
ꢀ 3 kV DC I/O Isolation
ꢀ Low Ripple and Noise
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
The PMM4 series is a family of cost effective 1 W regulated single output
DC/DC converters with short circuit protection. These converters are in an
ultra miniature SIP7 case. Devices are encapsulated. High performance
features: Regulated Output, 3000VDC input/output isolation, high efficiency
operation, output voltage accuracy of ±2% maximum, input range of ±10%
tolerance and low output ripple and noise.
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
10%
Capacitors
20 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
2%
Continuous
0.5%
Load Regulation (0% - 100%)
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
0.5% (3.3Vout Models: 1.0%)
50 mV pk-pk
0.02% / °C
General Specifications
Efficiency
See Table
3000 VDC
60 pF, typ.
1000 M Ohm
50 kHz (Variable)
95% rel H
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF (MIL-HDBK-217F) > 3.5 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Non Conductive Black Plastic (UL94V-0 rated)
Epoxy (UL94V-0 rated)
~ 2.7g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
-40 to +85°C (ambient)
100°C
-40 to +125°C
Free Air Convection (10 mm distance required)
Soldering 260°C, max. (1.5 mm from case 10s.)
RoHS Conform
PMM4-Series – P6LG-xxxxEK – Single Output – SIP7 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3