660000WW TTrraannssiieenntt VVoollttaaggee SSuupppprreessssoorr
SMD Diodes Specialist
P6KE-G Series
Stand-off Voltage: 6.8 ~ 600V
Power Dissipation: 600 Watts
RoHS Device
DO-15
Features
0.033(0.84)
0.027(0.71)
-Plastic package has underwriters laboratory
flammability classification 94V-0
1.000(25.40)
MIN.
-600W, surge capability at 1mS.
-Excellent clamping capability.
-Low Zener impedance.
-Fast response time: typically less than 1.0pS from
0 volt to BV min.
0.300(7.63)
0.230(5.85)
-Typical IR less than 1μA above 10V.
0.142(3.61)
0.102(2.60)
Mechanical Data
-Case: Molded plastic DO-15
1.000(25.40)
MIN.
-Terminals: Axial leads solderable per MIL-STD-
202, Method 208
-Polarity: Color band denotes positive end
(cathode)
Dimensions in inches and (millimeter)
-Weight: 0.4 gram (0.014oz.)
Maximum Ratings and Electrical Characteristics
Symbol
Parameter
Value
Unit
W
Peak power dissipation with a 10/1000μs
waveform(Note 1)
PPP
600
Peak pulse current with a 10/1000μs waveform
(Note 1)
IPP
PD
See Next Table
5.0
A
Power dissipation on infinite heatsink at TL=75OC
W
Peak forward surge current, 8.3mS single
half sine-wave unidirectional only
(JEDEC method) (Note 2)
IFSM
100
A
Maximum instantantaneous forward voltage at
50 A for unidirectional only(Note 3)
VF
3.5/5.0
V
Operating junction and storage temperature
range
OC
TJ, TSTG
-55 to +150
NTOES:
OC per fig. 1
(1) Non-repetitive current pulse, per fig.5 and derated above TA=25
(2) Measured on 8.3ms single half sine-wave or equivalent square wave,equare wave,duty cycle=4 pulses per minute maximum
(3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
REV:B
Page 1
QW-BTV06