P6AFC3.3A ~ P6AFC64A Series
Transient Voltage Suppressor
SMAF-C
3.3~64 V
600 W
Voltage
Power
Features
Small plastic package suitable for surface-mounted design
Very low package height: 1 mm
Excellent clamping capability
Ultra low reverse current
High temperature soldering : 260oC/10 seconds at
terminals
Lead free in compliance with EU RoHS 2.0
Green molding compound as per IEC 61249 standard
Mechanical Data
Case : Molded plastic, SMAF-C
Terminals : Solder plated, solderable per MIL-STD-750,
Method 2026
Approx. Weight : 0.0012 ounces, 0.034 grams
Maximum Ratings and Thermal Characteristics (TA = 25 oC unless otherwise noted)
PARAMETER
SYMBOL
LIMIT
UNITS
Peak Pulse Power Dissipation(tp=10/1000us)(Note 1,2)
Peak Forward Surge Current
PPP
600
W
IFSM
100
A
(8.3ms single half sine-wave)
Peak Pulse Current on tp=10/1000us Waveform(Note1,Fig.2)
Power Dissipation on Infinite Heat Sink at TL = 50 oC
ESD IEC61000-4-2(Air)
IPPM
PD
See next table
A
5
±30
W
VESD
kV
ESD IEC61000-4-2(Contact)
±30
Typical Thermal Resistance Junction to Ambient(Note 3)
Operating Junction Temperature Range
Storage Temperature Range
RθJA
TJ
150
oC/W
oC
-55 to +150
-55 to +150
TSTG
oC
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on 5.0x5.0mm copper pads to each terminal.
3. Mounted on a FR4 PCB, single-sided copper, standard footprint.
4. A transient suppressor is selected according to the working peak reverse voltage(VRWM), which should be equal to
or greater than the DC or continuous peak operation voltage level.
5. TVS is a transient protection device, it is strongly recommended not to use as a Zener.
August 14,2020
P6AFC3.3A_SERIES-REV.00
Page 1