THE WORLD OF DC/DC-CONVERTERS
www.peak-electronics.de
Tel. +49 ( 0 ) 6135 7026-0
peak@peak-electronics.de
P10CU-xxxxE/Z LF (1kV)
P10LU–xxxxE/Z (Hxx)LF (3-6kV)
Rev. 09-2015
PM3-SERIES
2 Watt
Unregulated
Single and Dual Output
SIP7 Case
1-6 kV DC I/O Isolation
Low Ripple and Noise
The PM3 series is a family of cost effective 2W single/dual output
DC/DC converters. They are encapsulated in an ultra miniature SIP7
(P10CU/LU…) or DIP14 (P10DU/MU…) case. High performance
features: 1000-6000Vdc input/output isolation, high efficiency operation,
output voltage accuracy of ±3% maximum, input range of ±10% and low
output ripple and noise.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Current max.
Output Specifications
±10%
Voltage accuracy
±3%
±1.2%
(See table)
(per 1% Vin change)
52 – 797mA
6 – 45mA
Line regulation
(See table)
Current No-Load
Filter
±10%
( 20% to 100% )
Load regulation
Capacitors
(for 3.3Vout) ±20%
75 mV pk-pk
±0.02%/°C
(@12uH)
Reflected Ripple Current
20mA pk-pk
Ripple & noise (20 MHz bandwidth)
Temperature coefficient
(Single out)
470uF
Capacitor load (Test: min. Vin + const. load)
(Dual out)
±220uF
General Specifications
(See table)
Efficiency
60% - 82%
Environment / Physical Specifications
(P10CU-xxxxELF)
1000VDC
3000VDC
(Derating)
(P10LU-xxxxELF)
Operation Temp.
-40°C to 85°C
100°C
Isolation I/O (60 sec)
(P10LU-xxxxEHxxLF)
Case max.
Storage
4000-6000VDC
-40°C to 125°C
Nature / Free Air
Isolation I/O Capacitance
Isolation I/O Resistance
Switching Frequency
60 pF
Cooling
1000 MΩ
(variable)
Case Material
Potting
Plastic (UL94V-0 rated)
Epoxy (UL94V-0 rated)
Alloy42 (Solder coated)
2.3 g
80 kHz
(rel.)
Humidity
95%
(Calculated MIL-HDBK-217F)
Pin Material
Weight
MTBF
>1.121 Mhrs
(designed to meet)
Safety Standard
IEC/EN 60950-1
EMC Specifications
Radiated Emissions
EN55022
Class B
Class B
Conducted Emissions*
EN55022
ESD
RS
IEC-61000-4-2
IEC-61000-4-3
IEC-61000-4-4
IEC-61000-4-5
IEC-61000-4-6
IEC-61000-4-8
Pref. Criteria A
Pref. Criteria A
Pref. Criteria A
Pref. Criteria A
Pref. Criteria A
Pref. Criteria A
EFT*
Surge*
CS
PFMF
*Input filter components are required to meet conducted emission class B
(see App Note). An external filter capacitor (e.g. 470uF/100V) is required
if the module has to meet IEC61000-4-4 and IEC61000-4-5.
PM3-Series – P10CU / P10LU – Single / Dual Output – SIP7 - Plastic Case
Specification can change without a notice - We accept no liability for any inaccuracy or printing errors.
Page 1/5