5秒后页面跳转
P10CUI-120512ZLF PDF预览

P10CUI-120512ZLF

更新时间: 2024-11-04 00:39:51
品牌 Logo 应用领域
PEAK /
页数 文件大小 规格书
3页 140K
描述
PM3-SERIES

P10CUI-120512ZLF 数据手册

 浏览型号P10CUI-120512ZLF的Datasheet PDF文件第2页浏览型号P10CUI-120512ZLF的Datasheet PDF文件第3页 
P10CUI-xxxxZ(H30)LF  
Mainzer Straße 151–153  
D-55299 Nackenheim  
Tel. +49 6135 7026-0  
Fax: +49 6135 931070  
www.peak-electronics.de  
peak@peak-electronics.de  
PM3-SERIES  
2 Watt  
Unregulated  
Rev.02-2009  
Dual Separate Output  
SIP7 Case  
1 - 3 kV DC I/O Isolation  
Low Ripple and Noise  
The PM3 series P10CUI-xxxxZ(H30)LF is a family of cost effective 2 W  
dual separate output DC/DC converters. These converters are in an ultra  
miniature SIP7 case. Devices are encapsulated. High performance  
features: 1000VDC up to 3000VDC input/output isolation, high efficiency  
operation, output voltage accuracy of ±3% maximum, input range of ±10%  
tolerance and low output ripple and noise.  
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified  
Input Specifications  
Voltage Range  
Input Filter  
Input Reflected Ripple Current¹  
10%  
Capacitor  
20 mA pk-pk  
Output Specifications  
Voltage Accuracy  
Short Circuit Protection  
Line Regulation  
Load Regulation (20% - 100%)  
Ripple and Noise (20Mhz bandwidth)  
Temperature Coefficient  
3%  
Short Term  
1.2% / 1% Vin Change  
10% (3.3 Vout Models: 20%)  
75 mV pk-pk  
0.02% / °C  
General Specifications  
Efficiency  
See Table  
1000 VDC (3000 VDC optional)*  
60 pF, typ.  
1000 M Ohm  
80 kHz (Variable)  
95% rel H  
I/O Isolation Voltage (3 sec.)  
I/O Isolation Capacity  
I/O Isolation Resistance  
Switching Frequency  
Humidity  
Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs  
Physical Specifications  
Case Material  
Potting Material  
Weight  
Non Conductive Black Plastic (UL94V-0 rated)  
Epoxy (UL94V-0 rated)  
~ 2.7g, typ.  
Environment Specifications  
Operating Temperature  
Maximum Case Temperature  
Storage Temperature  
Cooling  
-40 to +85°C (ambient)  
100°C  
-40 to +125°C  
Free Air Convection (10 mm distance required)  
Soldering 260°C, max. (1.5 mm from case 10s.)  
RoHS Conform  
PM3-Series – P10CUI-xxxxZ(H30)LF – Dual Separate Output – SIP7 - Plastic Case  
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.  
Page 1/3