P
www.vishay.com
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
FEATURES
• Load life stability 0.02 % typical at 8000 h
at 70 °C under Pd (0.033 % maximum)
• Low temperature coefficient down to 5 ppm/°C
(- 55 °C; + 155 °C)
• Very low noise < - 35 dB and voltage coefficient
< 0.01 ppm/V
• Wide resistance range: 10 to 76 M
depending on size
• Tolerances to ꢀ0ꢀ1 %
• In lot tracking 5 ppm/°C
• Termination: Thin film technology
• Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR
datasheet (www.vishay.com/doc?53053)
• Withstand moisture resistance test of AEC-Q200
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, Vishay Sfernice’s proven precision thin film
wraparound
resistors
exceed
requirements
of
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
MIL-PRF-55342G characteristics Y 10 ppm/°C (- 55 °C;
+ 155 °C) down to 5 ppm/°C (- 55 °C; + 155 °C).
STANDARD ELECTRICAL SPECIFICATIONS
RATED
RATED
LIMITING
RESISTANCE
RANGE (2)
()
TEMPERATURE
POWER POWER ELEMENT
TOLERANCE
COEFFICIENT
%
MODEL
SIZE
W
W
VOLTAGE
V
ppm/°C
Pn (1)
Pd (1)
P0302
P0402
P0505
P0603
P0805 (3)
P1005
P1206
P1505
P2010
0302
0402
0505
0603
0805
1005
1206
1505
2010
10 to 750K
10 to 1.5M
10 to 4M
0.040
0.063
0.125
0.125
0.200
0.250
0.330
0.350
1
0.030
0.040
0.050
0.100
0.125
0.125
0.250
0.175
0.500
25
50
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
5, 10, 25, 50, 100
50
10 to 3.2M
10 to 10M
10 to 8.1M
10 to 35M
10 to 15M
10 to 76M
75
150
75
200
200
300
Notes
•
Case size 2512 under development. Please consult Vishay Sfernice.
Pn = Nominal power - Pd = Derated power intended to improve stability.
For ohmic range versus tolerance and TCR see detailed table on next page0
(1)
(2)
(3)
Model P0805 being same size than case 0705 with same performances, only codification of P0805 remains.
CLIMATIC SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Operating temperature
Substrate
Alumina
- 55 °C; + 155 °C
range
Note
For temperature up to 230 °C, see PHT datasheet
Technology
Thin film
Nickel chromium with mineral
passivation or CrSi
Film
•
(www.vishay.com/doc?53050)
Protection
Silicone
B type: SnPb over nickel barrier for
solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrierfor
other applications
Terminations
Revision: 18-Jul-12
Document Number: 53017
1
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000