The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SUMICON 1600 SERIES RECTANGULAR CONNECTORS
The SUMICON 1600 series are multi-contact connec-
tors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45
and 60-contact models available (same as the 1300
series). The connector units are available in three
types: soldering, wrapping, and crimping. Accessories
are C case, CA case, CBA case, ST stopper, STA stop-
per, and STB stopper, By combining the many options
noted above, the SUMICON 1600 series connectors
meet a wide variety applications.
Standard Type
General
In the SUMICON 1600 series, the connector unit is
completely separated from the accessories such as the
cases and stoppers to diversify the specificaions and
facilitate wiring connection. The SUMICON 1600
series are specified in the NTT specifications No.1931.
Material and Finish
Part
Material
Finish
Blue
Electrical Characteristics
Glass filled
Item
Standard
Insulator
diallylphthalate resin
Contact
Resistance
7mΩ max.
at DC 1A
Male Terminal
Brass
Type A: Silver-plated
Type G: Gold-plated
Female Terminal
Phosphor bronze
Insulation
Resistance
1000MΩ min.
at DC 500V
NTT spec: ABS resin,
2.5PB 6.0/2.0(color)
Plug Case
ABS resin(black)
Steel
Withstand
Voltage
AC 1000V for 1 minute
Stopper Bracket
Nickel plating
Current Rating
Voltage Rating
3A
300V AC
Wire Wrapping Specifications
AWG
26
28
30
Applicable
wire(mm)
Applicable
wire
0.41
0.32
0.75
0.26
Max. coating
O.D(. mm)
0.95
0.6
Ordinary
wrapping
Coating
one wrap
Coating
one wrap
Wrapping method
Effective number of wrappings
about 8
about 8
2 wrap
about 9
Number of wrappings
per terminal
Ordering Information
-
- ( )
C □
P
W
16 34
□
A
(1) (2)
(3) (4) (5) (6)
(7) (8) (9)
(1) Shape of terminal opening
P: Male terminal
C: Plug case
ST: Stopper bracket with horizontal cable inlet opening
J: Jack Case
S: Female terminal
(2) Terminal connection method
No sign: Soldering
H: Handle
DB: Deep bracket
W: Wrapping C: Crimp
(3) Series No.
(8) Serial signs for accessories
Each accessory (C, ST, J, H, DB) is provided with sequence of
upper-case. alphabetic characters.
Sequence: No sign, A, B, C...
16: 1600 series
(4) Number of contacts 34: 34 contacts
(5) Serial sign for connctor units
Accessories, C, ST, or J followed by メno signモ : Side lock
types
Provided with a sequence of upper-case alphabetic charac-
ters.
Accessories, C and ST followed By A: Top touch lock type
Note: The space for no sign is filled sequentially.
(9) Special specification, ( ) is filled with a serial number,
except for the case and bracket, for which the following ap-
ply.
No sign or sign other than W: Soldering
Sequence: No sign, B, C, D, E ...
(6) Plating
A: Silver-plated
G: Gold-plated
(51): Bracket only
(50): Case only
(7) Signs for accessories
105
04/2009