OCXO
OCXO SERIES 5000
Rev B
1/23/04
ꢁ FEATURES
Small OCXO in SMD package
Frequencies up to 77.760 MHz
ꢁ ELECTRICAL PERFORMANCE
PARAMETER
OCXO SERIES 5000
AT CUT CRYSTAL
SC CUT CRYSTAL
Supply voltage, nom.
Power dissipation steady state
Warm-Up power
5V ±5% Standard (3.3V, 12V Optional)
1.5 Watt Max.
3 Watt Max
Warm-Up time.
3 min Max
Frequency range
1 To 77.760 MHz Standard
Frequency Adjustment
Freq. stability vs. temperature
LX: 0°C to 60°C
±5PPM Min (0 to 5V) Typical
±0.7PPM Min (0 to 5V) Typical
±0.05 PPM
±0.28 PPM
±0.37 PPM
±0.01 PPM
±0.03 PPM
±0.05 PPM
FZ: -30°C to 70°C
D3: -40°C to 85°C
(Standard, contact factory for different temp ranges and stabilities)
Freq. stability vs. supply
changes
±0.015 PPM Max for ±5% Change
±0.010 PPM Max for ±5% Change
Initial Calibration at 25°C
Freq. stability vs. load changes
Long term stability (Aging)
Typical at 10MHz
1/10 of Freq. Adjustment ( 0.1PPM minimum)
±0.01 PPM Max for ±5% Change
±4 PPM Max for 10 Years
±0.5 PPM/Year Max
±0.005 PPM Max for ±5% Change
±1 PPM Max for 10 Years
±0.150 PPM/Year Max
±0.005 PPM/Day Max.
±0.002 PPM/Day Max.
Output
HCMOS/TTL/PECL/Sine 0 to +7dBm (Low voltage CMOS Available)
-25dBc(Sine Output)
Harmonics
Spurious
-75dBc(Sine Output)
Duty cycle
Rise / fall time
40/60% to 60/40%(HCMOS)
. (HCMOS, 10%~90%Vout, 90%~10%Vout)
1 to 10MHz 10nS Max
10 to 30MHz 5nS Max
30 to 77.760MHz 3nS Max
Short term Stability
1 E-10 /Sec
5 E-11 /Sec
(Allan Variance)
Phase Noise Typical at 10MHz
Under Static conditions
Offset
10Hz
Phase Noise
Offset
10Hz
Phase Noise
-90 dBc/Hz
-125 dBc/Hz
-135 dBc/Hz
-110 dBc/Hz
-125 dBc/Hz
-140 dBc/Hz
100Hz
1000Hz
100Hz
1000Hz
10000Hz -150 dBc/Hz
10000Hz -150 dBc/Hz
The above Specification reflects the typical performance of this family of Oscillators.
Center Frequency, Temperature Stability, Aging, Phase Noise and Frequency Adjustment range are inter-related parameters. There are design
trade offs among this critical parameters and is not always possible to optimize all. Raltron Engineering can optimize to a specific requirement.
Please consult factory for your application.
**NOTE: Not for reflow process**
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: +001(305) 593-6033 ꢀfax: +001(305)594-3973 ꢀe-mail: sales@raltron.com ꢀinternet: http:/www.raltron.com