DC-DC Converter UNIT
OSNxxW SERIES
FEATURES
•5-24V out / 2-4 Amp SIP Package
•20-53V,30-53V InputVoltage
•High efficiency 97%
•Cost efficient open frame design
•2 YEARS WARRANTY
•RoHS compliant
•Single output
•Non isolation
•Different output voltage
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Input Voltage Range
Input Filter
20-53V, 30-53V
Capacitive
Table 1
Fuse Recommended
Voltage Set point Accuracy
Ripple & Noise (20MHz BW)1
+/-2% max
5V 100mVp-p max
12V-24V 1%Vp-p max
Remote On/Off Control
Protection
Line Regulation2
Load Regulation3
+/-0.5% max
+/-0.5% max
+/-0.5% max
GENERAL SPECIFICATIONS
Temperature Coefficient
Efficiency
90% min
250KHz Typ
Non-isolation
Continuouse
Short Circuit Protection
Over Load Protection
Switching Frequency
Isolation voltage
120%-220% Typ
Weight OSN02W-xxSxxRx
Weight OSN04W-xxSxxRx
7,5 g Typ
12.0g Typ
ENVIRONMENTAL SPECIFICATIONS
SIP Package
Operating Temperature
OSN02W-xxSxxRx
-25
-55
°
C to +70
°
°
C
C
50.8mm*13.0mm*10.7mm
50.8mm*26.0mm*10.7mm
Storage Temperature
Humidity
°
C to +125
OSN04W-xxSxxRx
95% max
ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 °C UNLESS OTHERWISE NOTED.
[1] The value includes the deviation from output voltage setting point, line and load.
[2] High Line to Low Line.
[3] Load Regulation is for output load current change from 10% to 100% Load
[4] Refer to the Derating Chart.
Power Systems – The Power Solution
Web:
www.Power-Systems.de
Info@Power-Systems.de
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Email:
Tel. :
Fax:
+ 49 / 70 62 / 67 59 - 6
+ 49 / 70 62 / 67 59 - 800
All specifications are subject to change without notice.
Page (1)
Version 1.0, 27th July 2009