ORNV (Divider)
Vishay Dale Thin Film
www.vishay.com
Molded, 50 mil Pitch, Dual-In-Line Thin Film Divider,
Surface Mount Resistor Network
FEATURES
• Close ratio tolerance (0.05 %)
• Tight TCR tracking 5 ppm/°C
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder (JEDEC MS-012 variation AA
package)
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Note
Actual Size
* Pb containing terminations are not RoHS compliant, exemptions
may apply
Vishay Dale Thin Film ORNV series voltage dividers provide
optimum ratio precision, small size and exceptional stability
for most applications. They offer a wide ratio range that is
listed in the selection guide and are available for immediate
delivery. The tight ratio tolerance offered on the standard
ratios will provide exceptional performance throughout life.
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
5
TCR
TOL.
25
ABSOLUTE
0.1
RATIO
0.05
SCHEMATIC
8
7
6
5
STANDARD RESISTANCE OFFERING
R1 ()
R2 ()
(Reference)
(4 Voltage Divider Resistors)
R1
R1
R1
R1
2K
5K
10K
5K
10K
20K
25K
50K
R2 (REF)
2K
1
2
3
4
5K, 10K, 20K, 25K, 50K
Note
• Consult factory for additional values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Passivated nichrome
-
Pin/Lead Number
Resistance Range
TCR: Absolute
8
2 k to 50 k
25 ppm/°C
-
-
- 55 °C to + 125 °C
TCR: Tracking
5 ppm/°C
- 55 °C to + 125 °C
Tolerance: Absolute
Tolerance: Ratio
0.1 %
0.05 %
+ 25 °C
+ 25 °C
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
100 mW
400 mW
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
R 0.05 %
R 0.015 %
< 0.1 ppm/V
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
-
-
-
-
-
Thermal EMF
0.08 μV/°C
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at + 25 °C
1 year at + 25 °C
Revision: 01-Sep-11
Document Number: 60112
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000