Photologic Hermetic Sensors
OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810,
OPL811, OPL811-OC, OPL813-OC, OPL820, OPL820-OC
Obsolete (OPL810-OC, OPL812-OC, OPL821-OC)
Features:
• Four output opꢀons available
• High noise immunity
• Direct TTL/LSTTL interface
• TO-18 hermeꢀcally sealed package
• Sensors mechanically and spectrally matched to other Optek devices (see
device descripꢀons detailed below)
Description:
All OPL800, OPL801 and OPL820 sensors consist of a photodiode, a linear amplifier and a Schmiꢁ trigger on a single silicon
chip (monolithic chip for OPL820). OPL810, OPL811 and OPL813 sensors also have a voltage regulator added to their
photologic chips. Each device’s photologic chip is mounted onto a standard TO-18 header and hermeꢀcally sealed in a
lensed metal can.
All devices in the series feature TTL/LSTTL compaꢀble logic level output, which can drive up to 8 TTL loads (OPL800, OPL801)
or up to 10 TTL loads (OPL810, OPL811, OPL813 and OPL820) without addiꢀonal circuitry. On all these devices, the Schmiꢁ
trigger’s hysteresis characterisꢀcs provide high immunity to noise on input and VCC.
OPL800 series devices feature medium-speed data rates to 250 kBaud, with typical rise and fall ꢀmes of 25 nanoseconds.
OPL800 and OPL801 devices are mechanically and spectrally matched to OP130 and OP231 series LEDs. OPL810, OPL811,
OPL813 devices are mechanically and spectrally matched to OP130 and OP230 series devices. OPL820 devices are
mechanically and spectrally matched to OP130 and OP231 series LEDs.
Applications:
OPL80_ or
OPL81_
Pin #
OPL82_
Ground
Output
• Non-contact reflecꢀve object sensor
• Assembly line automaꢀon
• Machine automaꢀon
• Machine safety
• End of travel sensor
• Door sensor
1
2
Ground
VCC
3
Output
VCC
Mounted to TO-18 Base
[MILLIMETERS]
INCHES
DIMENSIONS ARE IN:
RoHS
General Note
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢀon without
noꢀce or liability. All informaꢀon is subject to TT Electronics’ own data and is
considered accurate at ꢀme of going to print.
www.ꢁelectronics.com | sensors@ꢁelectronics.com
Rev D 07/2022 Page 1
© TT electronics plc