OPL530, OPL531, OPL535, OPL536, OPL550,
OPL551, OPL560, OPL561, OPL562, OPL563
Features:
Choice of four output opꢁons in low-cost side-looking package
Choice of two sensiꢁvity opꢁons (OPL560/561/562/563)
High noise immunity
Direct TTL/LSTTL CMOS interface
Data rates to 250 kBaud for all except OPL560 series (200 kBaud)
Low power consumpꢁon
RoHS
Descripꢀon: All components in this series include a photodiode, amplifier, voltage regulator, Schmitt trigger and
NPN output transistor on a single silicon chip. OPL560 chips also include a voltage regulator on the chip. All
devices in the series have a Photologic® chip that is encapsulated in a molded plastic side-looking package with
an integral lens (recessed integral lens for OPL535 and OPL536). This packaging provides enhanced optical
coupling, combined with mechanical protection. The hysteresis characteristics of the Schmitt trigger on each
device offers high immunity to noise on input and VCC.
OPL530, OPL531, OPL535 and OPL536 include a 10 K Ω pull-up resistor (RL) from output to VCC. These
components exhibit very stable performance over supply voltages ranging from 4.5 V to 16 V and a wide range of
irradiance levels. OPL550 and OPL551 devices feature TTL/LSTTL compatible logic level output which can drive
up to 8 TTL loads without additional circuitry and medium-speed data rates to 250 kBaud, with typical rise and fall
times of 25 nanoseconds. OPL560, OPL561, OPL562 and OPL563 devices feature TTL/LSTTL compatible logic
level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.
OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 are mechanically and spectrally
matched to OP140 and OP240 LEDs. OPL535 and OPL536 are mechanically and spectrally matched to OP145
and OP245 series LEDs.
Applicaꢀons: Non-contact reflecꢁve object sensor, Assembly line automaꢁon, Machine automaꢁon, Machine safety, End of travel
sensor, Door sensor
Input Power Range
(mW/cm2) [Min/Max]
Base Part Number
Package
Output Type - with Light
-
A
B
OPL530, OPL530-OC
OPL531A, OPL531-OCA
Internal 10K - High
Internal 10K - Low
Internal 10K - High
Internal 10K - Low
Totem Pole - High
Totem Pole - Low
Totem Pole - High
Totem Pole - Low
Totem Pole - High
Totem Pole - Low
External Lens
0.08/0.40
0.08/0.25
0.20/0.40
OPL535A, OPL535B
Recessed
Lens
OPL536A, OPL536-OC, OPL536-OCA
OPL550, OPL550A, OPL550-OC, OPL550-OCA
OPL551A, OPL551-OC, OPL551-OCA
OPL560, OPL560A, OPL560-OCA
OPL561, OPL561-OC, OPL561-OCA
OPL562, OPL562A, OPL562-OC, OPL562-OCA
OPL563, OPL563-OC, OPL563-OCA
0.25/2.4
0.25/2.5
0.25/1.4
0.25/1.5
N/A
N/A
External Lens
0.09/0.55
0.09/0.36
0.025/0.23
0.025/0.14 N/A
OC = Open Collector Output
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue C 09/2016 Page 1
© TT electronics plc