Photologic® Sensor
OPL530, OPL531, OPL535, OPL536, OPL550,
OPL551, OPL560, OPL561, OPL562, OPL563
Features:
• Choice of four output opꢀons in low-cost side-looking package
• Choice of two sensiꢀvity opꢀons (OPL560/561/562/563)
• High noise immunity
• Direct TTL/LSTTL CMOS interface
• Data rates to 250 kBaud for all except OPL560 series (200 kBaud)
• Low power consumpꢀon
Description:
All components in this series include a photodiode, amplifier, voltage regulator, Schmiꢁ trigger and NPN output transistor on a single
silicon chip. OPL560 chips also include a voltage regulator on the chip. All devices in the series have a Photologic® chip that is encapsulated
in a molded plasꢀc side-looking package with an integral lens (recessed integral lens for OPL535 and OPL536). This packaging provides
enhanced opꢀcal coupling, combined with mechanical protecꢀon. The hysteresis characterisꢀcs of the Schmiꢁ trigger on eachdevice
offers high immunity to noise on input and VCC.
OPL530, OPL531, OPL535 and OPL536 include a 10 K Ω pull-up resistor (RL) from output to VCC. These components exhibit very stable
performance over supply voltages ranging from 4.5 V to 16 V and a wide range of irradiance levels.OPL550 and OPL551 devices feature
TTL/LSTTL compaꢀble logic level output which can drive up to 8 TTL loads without addiꢀonal circuitry and medium-speed data rates to 250
kBaud, with typical rise and fall ꢀmes of 25 nanoseconds. OPL560, OPL561, OPL562 and OPL563 devices feature TTL/LSTTL compaꢀble
logic level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.
OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 are mechanically and spectrally matched to OP140 and OP240
LEDs. OPL535 and OPL536 are mechanically and spectrally matched to OP145 and OP245 series LEDs.
Applications:
Input Power Range
(mW/cm2) [Min/Max]
•
•
•
•
•
•
Non-contact reflecꢀve object sensor
Assembly line automaꢀon
Machine automaꢀon
Machine safety
End of travel sensor
Door sensor
Base Part Number
Package
Output Type - with Light
-
A
B
OPL530
OPL530-OC
Internal 10 K - High
Open Collector - High
Internal 10 K - Low
Open Collector - Low
Internal 10 K - High
Internal 10 K - Low
0.12/
0.38
--
--
External
Lens
OPL531A
--
--
--
OPL531-OCA
0.12/
0.280
OPL535A, OPL535B
OPL536A, Obsolete - OPL536-OC, OPL536-OCA
Recessed
Lens
0.23/
0.38
OPL550, OPL550A
Obsolete - OPL550-OC
Totem Pole - High
0.25/ 0.25/
2.4 1.4
OPL550-OCA
OPL551, Obsolete - OPL551A
OPL551-OC, OPL551-OCA
OPL560, OPL560A
Open Collector - High
Totem Pole - Low
N/A
Open Collector - Low
Totem Pole - High
Open Collector - High
Totem Pole - Low
External
Lens
OPL560-OCA
0.09/ 0.09/
0.55 0.36
N/A
N/A
OPL561
OPL561-OC, OPL561-OCA
Open Collector - Low
OPL562,
Obsolete - OPL562A
Totem Pole - High
0.025 0.025
/0.23 /0.14
OPL562-OC, OPL562-OCA
Open Collector - High
Totem Pole - Low
OPL563, Obsolete - OPL563-OC, OPL563-OCA
OC = Open Collector Output
OCA = Open Collector Output Inverted
RoHS
General Note
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢀon without
noꢀce or liability. All informaꢀon is subject to TT Electronics’ own data and is
considered accurate at ꢀme of going to print.
www.ꢁelectronics.com | sensors@ꢁelectronics.com
Rev H 06/2022 Page 1
© TT electronics plc