Focused for maximum sensiꢀvity
Phototransistor Output
650nm Visible Red LED to opꢀmize detecꢀon of dye based inks
Low-cost plasꢀc housing
24” minimum 26AWG wire leads
Opꢀmal operaꢀng distance range 0.015” [.38mm] to 0.045” [1.14mm]
The OPB739RWZ is a reflecꢀve line reader sensor. The sensor uꢀlizes a visible red (650nm) LED and an NPN silicon
phototransistor mounted side by side on converging opꢀcal axes in a black plasꢀc housing. The converging light beam
makes this sensor capable of detecꢀng line widths as small as 0.004” [0.1mm] at the opꢀmum distance of 0.030” [0.76mm]
from the target. The red LED maximizes the reflected signal contrast of black lines on white backgrounds. Recommended
line spacing is .050” minimum.
This sensor can be used with Optek’s OCB100CZ auto calibraꢀon module to reduce variability from sensor to sensor and to
achieve a digital output.
Custom electrical, wire, cabling and connectors are available. Contact your local representaꢀve or OPTEK for more
informaꢀon.
Line Reading
Low Resoluꢀon Bar Code Sensing
Paper edge detecꢀon
Mark detecꢀon
Reflecꢀve Opꢀcal Encoders
RoHS